Cog keeps slipping
Hello
I'm having troubles with OnOne hubs and cogs (these are made in Taiwan and sold in UK under the OnOne name). Cog keeps slipping during skid, I used the shimano whip for cog and lockring http://www.chainreactioncycles.com/I.../Full/5726.jpg I even rotafixed the cog on the hub and used a small spacer just to be sure that the lockring was pressed hard on the cog without result. Maybe the hub is defective? |
What do the threads currently look like?
|
stripped probably, if you can post a picture of the threads it would help
|
Originally Posted by Ziemas
(Post 5583125)
What do the threads currently look like?
|
On-one hubs - they look identical to dimension hubs. The solution to your problem is to use rotafix on the cog and then get hozan lockring pliers and really tighten the lockring on.
It also helps not to use cheap cogs/lockrings. It also helps even more not to have a spacer on the lockring (why?). Less thread engagement on the lockring = bad. The other solution is to get a brake and stop skidding. |
All times are GMT -6. The time now is 02:59 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.