Help with my Kilo TT build?
Hey,
I just ordered a Kilo TT frame and this would be my first build. I'm slowly just looking for used parts on craigslist and ebay.. but I'm unsure of a few things. 1. I just got a Cane Creek C2 aheadset but I realized it was a threadless, and I'm not sure if I could use it? Is their anyway I could? 2. Cranks and BB, Am I supposed to look for a special sizing besides the 68mm English Threaded and The crank length I want? Thanks |
1. Depends on the size of the frame you got and hte length of the steerer that came with it. It was a goofy mix up and some can and some can't do the whole threadless scene.
2. You want to get that other number for the BB. 68x103mm seems standard for a few cranks such as the Alien crankset. This number helps you get a chainline of 42mm to match the rear chainline of most track hubs like Formula. |
Hey.. Thanks.
I have the 50cm, and I believe it will work? |
^^^ For example, IRO cranks fit with a 110mm spindle to yield a 42mm chainline (which is a measurement of the chain's distance from the center of the frame, and also from the center of the hub). Basically, as m4bandit said, most 120mm track hubs put the chain 42mm from center, so you want to figure out what bb length you'll need for whatever cranks you choose.
|
Originally Posted by 1150A
(Post 6577808)
Hey.. Thanks.
I have the 50cm, and I believe it will work? If you find that you can only do threaded with your current fork, there are threadless adapter options available. |
Originally Posted by 1150A
(Post 6576852)
2. Cranks and BB, Am I supposed to look for a special sizing besides the 68mm English Threaded and The crank length I want?
Thanks http://www.chucksbikes.com/store/ (click on "other") http://www.irofixedgear.com/index.as...PROD&ProdID=13 |
Alright.. thanks for the help everyone.
So there's no way to use a threadless headset besides getting a new fork? |
Originally Posted by 1150A
(Post 6580084)
Alright.. thanks for the help everyone.
So there's no way to use a threadless headset besides getting a new fork? Threadless Adapter. |
Thanks M4. I'm just a bit confused because the Nashbar.com live help staff said a threadless adaptor wouldn't work.
Anyone using one these? Any downsides? |
Well I just looked and realized you got a threadless headset. You would need a threaded headset for the fork. Then you could use the adapter. But by that point, you may as well use a quill stem. I misunderstood and thought you had a threadless stem already. In reality, you should post a photo of your frame and fork inserted into the headtube so maybe we could take a look at the length and be able to better understand what you're working with.
|
To my knowledge the Kilos are all threaded. Spend a little extra and get a decent headset...I prefer unsealed so I can repack the bearings. There are a ton on ebay cheap. You need to get cranks BEFORE you buy a BB...the cranks dictate the spindle width. Again...ebay some older cranks. That being said...I also prefer 1/8" to 3/32" drivetrains. DECIDE NOW! Your ability to find 1/8" stuff greatly depends on what bolt pattern your cranks have. 144bcd, 130bcd, 110bcd are the most common. If you plan on running 1/8" look for 144bcd cranks. There is a plethora of 1/8" stuff made for them. The 3/32" route, if you choose that. will be better suited to 130bcd cranksets. You CAN get 1/8" stuff but it's not as common and pricey.
|
Thanks again everyone. I'll be selling the headset I have and getting a threaded.
Any thoughts on these cranks? http://sfbay.craigslist.org/eby/bik/655394874.html |
Originally Posted by 1150A
(Post 6582469)
Thanks again everyone. I'll be selling the headset I have and getting a threaded.
Any thoughts on these cranks? http://sfbay.craigslist.org/eby/bik/655394874.html |
don't get the miche primato headset, the fork is too short for it
|
Originally Posted by stewardmike03
(Post 6581758)
To my knowledge the Kilos are all threaded
|
Originally Posted by Daijoubu
(Post 6602908)
The fork of the framesets from bikeislan are unthreaded, the factory screwed up so peoples have too short of a steering tube for thier head tube to run threadless. You still need to thread it afaik
my 57 came with a fork that needed to be cut down about exactly an inch...no problems. |
All times are GMT -6. The time now is 11:51 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.