Name this frame
#1
Junior Member
Thread Starter
Join Date: Sep 2008
Posts: 8
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Name this frame
Just starting my first singlespeed build and came across this frame in my grandparents barn. Someone in the family worked for a bike manufacturer and gave them boxes of sample parts (dia-compe, shimano, speed pit, etc.) and a frame. Most of the parts have tags on them from 1973 so I'm assuming the frame is from the same year. I took the frame to a few bike shops and no one had an answer. The only info I know is that all of the tubing is magnesium alloy except for the seat tube which is steel. Also, the tubes have fake lugging and are bonded into place. The rear dropout is also very thick and unique. There are no markings on the frame except a serial number on the bottom.
So does anyone have a guess on this one? Any reason this wouldn't work as a singlespeed frame?
Thanks!!
Also, this is my first post so let me know if I need to post pictures in a different format.
So does anyone have a guess on this one? Any reason this wouldn't work as a singlespeed frame?
Thanks!!
Also, this is my first post so let me know if I need to post pictures in a different format.
#2
.
Join Date: Aug 2005
Location: Rocket City, No'ala
Posts: 12,760
Bikes: 2014 Trek Domane 5.2, 1985 Pinarello Treviso, 1990 Gardin Shred, 2006 Bianchi San Jose
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 62 Post(s)
Likes: 0
Liked 24 Times
in
11 Posts
Perhaps you or one of the mods could move this to the Classic and Vintage forum. Doesn't look like any Raleigh, Schwinn, Gitane, Peugeot I've seen nor does it appear to be Italian. Touring bike by the geometry and rack/fender eyelets. Cast bottom bracket.
A magnesium alloy would make it aluminum. Most likely Reynolds 531 Manganese alloy steel.
Nice bike.
A magnesium alloy would make it aluminum. Most likely Reynolds 531 Manganese alloy steel.
Nice bike.
#5
Senior Member
Join Date: Dec 2007
Posts: 413
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
My friend had a bike with lugs that looked a lot like that. It was called a Kabuki by Bridgestone. It was aluminum (magnet wouldn't stick) tubing with incredibly beefy, heavy lugs. I think the seattube came loose inside the BB shell/lug. It could be moved up and and down a few mm, causing the whole frame to flex in ways that frames should never flex. Especially aluminum ones. That can't be par for the course, though. I'm sure that something catastrophic happened in this frame's life that caused such crazy damage.
Try to stick a magnet onto the frame. If it sticks, it's steel, if it doesn't, it's probably aluminum. If it's aluminum, I bet it's the same kind of frame my friend had, even if it was branded differently. It will work as a singlespeed frame as long as it's not damaged.
Try to stick a magnet onto the frame. If it sticks, it's steel, if it doesn't, it's probably aluminum. If it's aluminum, I bet it's the same kind of frame my friend had, even if it was branded differently. It will work as a singlespeed frame as long as it's not damaged.
#7
extra bitter
My friend had a bike with lugs that looked a lot like that. It was called a Kabuki by Bridgestone. It was aluminum (magnet wouldn't stick) tubing with incredibly beefy, heavy lugs. I think the seattube came loose inside the BB shell/lug. It could be moved up and and down a few mm, causing the whole frame to flex in ways that frames should never flex. Especially aluminum ones. That can't be par for the course, though. I'm sure that something catastrophic happened in this frame's life that caused such crazy damage.
Try to stick a magnet onto the frame. If it sticks, it's steel, if it doesn't, it's probably aluminum. If it's aluminum, I bet it's the same kind of frame my friend had, even if it was branded differently. It will work as a singlespeed frame as long as it's not damaged.
Try to stick a magnet onto the frame. If it sticks, it's steel, if it doesn't, it's probably aluminum. If it's aluminum, I bet it's the same kind of frame my friend had, even if it was branded differently. It will work as a singlespeed frame as long as it's not damaged.
An interesting distinction for Kabukis is that the aluminum lug at the top of the seatpost doesn't let you clamp down with a binder bolt to hold the post in place. Instead, the post uses a wedge like a quill stem, with a bolt at the top of the seat post for releasing the wedge and adjusting seat height. If this bike has that sort of seat post, then perhaps it's a Kabuki after all. However, mine doesn't have the sleeved dropouts. Regardless, it would be really sad to have a Kabuki without the kickass headbadge.
EDIT: At first, I thought the bike had a seat post binder, but after a second look, I'm not so sure. Is that just a mount for the brake routing? If so, it may be a Kabuki after all: https://www.sheldonbrown.com/japan.html#kabuki
Last edited by kyselad; 09-04-08 at 03:31 PM.
#8
:)
Join Date: Nov 2006
Location: duluth
Posts: 3,392
Bikes: '07 Pista, '09 Fantom Cross Uno, '8? Miyata, '67 Stingray, '0? Zoo mod trials, Tallbike, Chopper, '73 Schwinn Collegiate, '67 Triumph Chopper, '69 CB350, '58 BSA Spitfire, '73 CB450
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I name thee:
Rutherford Von Funkenstien III.
Rutherford Von Funkenstien III.