need bar help
can a 25.4 bar work reasonably well with a 26 stem?
I'm looking for some riser bars and I have come to a dead end. I like the width at around 470mm, but my only problem is I can't tell from pictures online if oury grips and a lever will be sloping on the inside of the bars when cut to that width. Neither of the LBS's have anything I can really compare either. I'm deciding on either a pair of cheap eastons I found or just some generic alloy bars on e-bay. http://www.pricepoint.com/detail/195...p=195%20EASE38 http://cgi.ebay.com/ws/eBayISAPI.dll...=STRK:MEWAX:IT |
They make shims, or you can use some old bike tube.
|
you can also use a metal strip from a soda/beer can
|
Originally Posted by skadoosh
(Post 10698268)
you can also use a metal strip from a soda/beer can
beer can shims are awesome. |
Originally Posted by illdthedj
(Post 10698893)
THIS.
beer can shims are awesome. http://harriscyclery.net/product/nit...o-26.0-417.htm http://www.longleafbicycles.com/wp-c...im-300x240.jpg Many bike shops have them in stock. |
you wont get any hipster cred points with those though
*SARCASM* |
Originally Posted by illdthedj
(Post 10699189)
you wont get any hipster cred points with those though
*SARCASM* |
i used a tecate can on mine. -2 hipster points :(
but it matches the color of some components! :) |
Originally Posted by illdthedj
(Post 10699392)
i used a tecate can on mine. -2 hipster points :(
but it matches the color of some components! :) |
alright perfect, I'll either order those shims or locate the nearest can.
But I'm still not sure which bars, I want the grips and lever to be straight with a width of about 470 edit: any input on the easton bars? or a suggestion for some chrome ones? |
get something with more rise and make sure it has a good few degrees of sweep.
I like the B-Witch (Japanese) branded bars, they are 25.4mm and come in many colours and are cheap!! http://www.chariandconyc.com/images/...DSC_0736.3.jpg |
Originally Posted by the_don
(Post 10706836)
make sure it has a good few degrees of sweep.
http://ep.yimg.com/ca/I/yhst-8422422...7_2101_4992368 Also, look in universal cycles. They have a lot of steel/aluminum silver ones. Not chrome, but they look nice enough. |
Originally Posted by Yo!
(Post 10699225)
Hahha seriously. If you make a beer can shim, just remember to cut it out so that the PBR logo is fully intact. Under the stem clamp.
http://www.os2.dhs.org/~john/fixed-frame/bars.jpg |
All times are GMT -6. The time now is 04:48 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.