New Gavin Solo, stem question
#1
Senior Member
Thread Starter
Join Date: Apr 2010
Posts: 129
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
New Gavin Solo, stem question
I'm just getting back into bicycling since the mid 80's and picked up this Gavin Solo. It's pretty light and smooth riding. I'm 5'9" so I ordered a 54cm frame but I have the seat all the way back and I still feel a tiny bit cramped. I'm guessing I could swap out the stem but I'm new to road bikes. The stock stem is: "Tec9 25.4 60mm 0 degree Silver Alloy". I don't want to get the wrong size so if someone could give me an idea that would be great.
#2
Ride for Life
Join Date: Jun 2004
Location: Houston
Posts: 2,740
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
judging from the photos i've seen, it looks like a 1 1/8" threadless... and i would say a 26.0 bar clamp size... but the 25.4 throws me off... i didn't think anyone made anything in that size anymore?
i think you will be hard pressed to find another stem that is a 1 1/8" steertube clamp and a 25.4 bar clamp... but if it's actually 26.0 then there are a lot out there. the 60mm is the actual length of the stem, so you'll want something longer obviously
i think you will be hard pressed to find another stem that is a 1 1/8" steertube clamp and a 25.4 bar clamp... but if it's actually 26.0 then there are a lot out there. the 60mm is the actual length of the stem, so you'll want something longer obviously
#3
Senior Member
Thread Starter
Join Date: Apr 2010
Posts: 129
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
(pardon any Noob terminology)
Thanks. Yeah, it states the fork tube is 1 1/8" threadless. Since I have the seat all the way back, what size do you think would be a good choice? I also see there's angled ones too.
I have my bars setup exactly like this:
Thanks. Yeah, it states the fork tube is 1 1/8" threadless. Since I have the seat all the way back, what size do you think would be a good choice? I also see there's angled ones too.
I have my bars setup exactly like this:
Last edited by The Messenger; 04-30-10 at 08:50 AM. Reason: add photo