Advertise on Bikeforums.net



User Tag List

Results 1 to 5 of 5
  1. #1
    Senior Member Bat56's Avatar
    Join Date
    May 2010
    Location
    St.Paul, MN
    Posts
    1,628
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    what's up with this eno eccentric hub chainline

    I've measured about 20 times. I am getting exactly 47.5 at my front ring, but the fixed side of the ENO is 42 something. The free side is about 47 or 48, so that is fine.

    What the hello is up with the fixed side? I have the cog facing the correct direction.

  2. #2
    A little North of Hell
    Join Date
    Mar 2006
    Posts
    4,301
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    yep, that is the way it was engineered.
    [SIGPIC][/SIGPIC]
    XXXI

  3. #3
    Senior Member Bat56's Avatar
    Join Date
    May 2010
    Location
    St.Paul, MN
    Posts
    1,628
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Good to know. At least I'm not nuts (on this issue).

  4. #4
    Senior Member
    Join Date
    Nov 2009
    Posts
    7,120
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    I set mine up centaur cranks (uses 111mm bb) and a chorus bb (102mm) this moved the ring about 4.5mm closer than campagnolo intended. The clearance is very close, but the chain line is almost perfect.

    Originally I had chorus cranks (moved to geared ride) and the chain line was as you describe.

  5. #5
    Senior Member Bat56's Avatar
    Join Date
    May 2010
    Location
    St.Paul, MN
    Posts
    1,628
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    I ended up using 4mm spacers to move my chainring inboard. 35T ring is almost scraping the chainstay. But it works.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •