DrakeHawton

Still getting into the fixed swing of things and was thinking about how ok going to be using my bike as my main source of transportation and the last thing I need is to have a part come loose or something break. I was wondering what tools do you guys carry with you and use the most or are most crucial to you?

CaptainCool

Multitool with chain tool and spoke wrench, a few spare chain links, 15mm wrench, crescent wrench (it is an old bike), tire levers, patch kit, co2 inflator, spare tube, and $4 in my wallet reserved for a tire boot or bus fare.

Also the day after I fix something that needs another tool, I carry that tool too.

eLJardins

15mm wrench for my wheels. patch kit(lever, patches, tube) if u want u can get an allen key multi tool

bhop

I commute to work every day, 25 miles round trip. As far as tools, I carry my multitool, spare tube, patch kit, co2 pump + cartridges, and a 15mm wrench when I ride the Sputnik. I haven't really needed anything else so far. I once had a shifter cable snap on my road bike that left me stuck in the highest gear for around 8 miles.. uphill.. I didn't have a tool with me to fix it.. that sucked..

I generally check my bikes from time to time when i'm at home, so if there are any problems, I can take care of it before I get out on the road.

DrakeHawton

definitely going to pick up a multi tool, mini cresent wrench, some chain links, extra tube and co2 pump now. i think that will take care of anything?

calv

You're going to want tire levers and a patch kit could make things easier.

yummygooey

Patch kit and 15mm wrench.

I would carry a mini pump if I had one.

klaw091

hehe whats the point of the patch kit if you dont have a pump or tire levers

geist

15mm wrench, spare tube, CO2 pump w/ 2 cartridges, 3 way wrench, tire lever, patch kit.

Scrodzilla

I typically carry a tire lever, Co2 pump w/ two cartridges, a spare tube, patch kit, 15mm stubby wrench and a multi-tool.

However, the last time I got a flat, I fumbled with my Co2 inflator while installing the cartridge, dropped it and it went down a damn storm drain. It was a long walk home in the middle of the night.

leed

If this ever happens again, just adjust your stops next time so the rear derailler doesn't retract all the way to the highest gear.

As for tools, I don't carry anything but water. Probably a bad thing.. But I suppose it could be worse.

Kayce

Working as a messenger I have a few more tools in my bag than most, but they have all been usefull at some point.

Combo 15mm/ headset wrench(the headset part isnt a nessisary carry all the time tool, but its been nice to have a few times)
Small adjustable box
Patch kit(4 patches, tire boot, glue, sand paper, valve adaptor)
spare tube
Tire levers
hand pump(always works, unlike co2)
allen key set
spoke wrench
zip ties
tape

jdgesus 

!!!

i always carry zips

M_S

I only use CO2 when I'm racing and wan to be able to fix a flat as soon as possible. Otherwise pumps are better IMO. Slower, but unlimited use and less expensive in the long run. The best I've used is are the Topeak road and mountain morphs. They have a retractable hose, gauge, and footrest. Basically a mini-floor pump.

Philthy Bastard

Surprised no one mentioned a lighter and papers.

AngryScientist 

one of these, need to keep that lockring tight.

tgscordv6

multi-tool, 15mm wrench, tire levers, CO2 kit, spare tube

Danzaxbonanza

I usually carry a trixie tool, Allen key multi-tool, tire levers, patch kit, mini pump, and a presta to schraeder valve adapter. Cone wrenches wouldn't be a bad thing to carry either.

jtso23

What tools would I need to remove all the components off the frame?

leed

Metric hex keys and you might need some box wrenches or sockets. Some more specific tools for the headset cups and bottom bracket/cranks, depending on what you've got.

Kayce

Other than the usual wrenches and allens you would need

Headset wrench(come in a few sizes, and only needed if its a threaded headset)
Pedal wrench (narrow 15mm box wrench)
Crank puller
BB wrench(either a flat box wrench, or a spanner)
Lockring tool
Chain whip, freewheel remover(lots of variety)
Chain break
Headset extractor(rocket ship)

Other tools for taking things apart, thats not really stripping the frame
Spoke key
Cone wrench(a few sizes)
Tire levers

Other things you need for proper maintenance
Floor pump
Chain oil
Grease(carbon parts use a different grease)
Cable cutters
Pressure gauge
Truing stand
Torque wrenches
Headset press.

time bandit

also a headset extractor and a hammer

Kayce

I knew my list wasnt complete, thank you. Im going to update it.

time bandit

i like "(rocket ship)" hhahaha, very apt description...

Sixty Fiver

I carry a multi tool, 6 inch adjustable wrench, tyre levers, spare tube, mini pump (on the frame usually), zip ties, a few spare 5mm bolts, chain links, a patch kit, and a very small bottle of chain lube.