Advertise on Bikeforums.net



User Tag List

Results 1 to 4 of 4
  1. #1
    Senior Member Binxsy's Avatar
    Join Date
    Nov 2009
    Location
    South Central Minnesota
    My Bikes
    79 Peugeot UO8, 89 Peugeot Triathlon, 1969 Shwinn Suburban, 99 Schwinn Super Stock 2, 60's Hiawatha
    Posts
    455
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    I need a crank suggestion

    So it is almost bicycle weather again well here in Minnesota well for me that is. At the end of last summer my cartridge bottom bracket decided to bust. It pretty much jiggles back and forth, which is no bueno.The crank I have attached is a used brand I have never heard of , the chainring is set in really far (like with a 110mm bb the chain ring would scrape the frame) but it was a long bottom bracket so the chainline was acceptable. Probably came off of some old BMX or other odd bike from the 80's. Anyway this is all mounted on a 79 peugeot U08 (english thread), so I need a crank suggestion also I want a bash gaurd to my chain and pants in check..

    If I could I would like to keep my current crank it has a bashgaurd built into it sort of like the white industries ones. But it might just be to much of a hassle.

    Here is a picture if it helps:



    This is just my beater aroud town/bar bike. So on the cheap side is what I am thinking.
    So It Goes.....

    89 Modernized Peugeot Triathalon
    79 Peugeot U-08 single speed
    8? Sekai Grand Tour 2500 single

  2. #2
    Senior Member rustybrown's Avatar
    Join Date
    Jul 2009
    Location
    DeSouf
    Posts
    2,137
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by Binxsy View Post
    Anyway this is all mounted on a 79 peugeot U08 (english thread)
    Whaaa...?

    Pull off the cranks, inspect the BB. Chances are one of the cups have come loose. Or it's not really an English thread. If needed, replace the BB.

    Or go vintage stronglight. Some of the models had a chain guard.

  3. #3
    Senior Member Binxsy's Avatar
    Join Date
    Nov 2009
    Location
    South Central Minnesota
    My Bikes
    79 Peugeot UO8, 89 Peugeot Triathlon, 1969 Shwinn Suburban, 99 Schwinn Super Stock 2, 60's Hiawatha
    Posts
    455
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Yeah I know they switched to english in in 1980. I am 100% sure that this has a english thread, since I have a fench BB and it would not go it at all. This is not a cup and ball BB it is a sealed cartriage BB, it is a sinz 118mm. It is actually meant for bmx bikes.



    I think my local LBS tried to put a a swiss on it before I just took it into my own hands and made it work..And when I said I made it work I did this.



    The threading in the frame shell was short so it did not go on all the way in on one side, but about 3/4 of the thread was in the shell so I figured it would be ok and the chainline looked good. Yeah I know this is probally why it is screwed up, but like I said it is a beater bike. I used to have this set up as a geared bike and I had a shimano cartridge BB and it went in just fine but it had less threads.
    So It Goes.....

    89 Modernized Peugeot Triathalon
    79 Peugeot U-08 single speed
    8? Sekai Grand Tour 2500 single

  4. #4
    %#&*#%>?% Build your own's Avatar
    Join Date
    Feb 2008
    Location
    Mass
    My Bikes
    Pake,Shogun,Nishiki,Motobecane
    Posts
    845
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    If you like this crank and all that's wrong is the busted bb, get a shimano un54 in 118 and be done.
    Edit: I just noticed that the exposed thread is on the DS, so measure the exposed thread and add that to the spindle lenght and get whatever that comes out be.
    Last edited by Build your own; 03-13-11 at 09:45 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •