Suggestions on pump to mount on frame
10-10-11, 05:44 PM
#26
Decrepit Member
Performance 40-0330 Hurricane ATB Extra Mini Pump Mount. I used a Velcro strap to secure the pump to the mount. I also used a heat gun to soften the plastic so I could squeeze the clamps slightly to better fit the smaller diameter of the Road Morph G.
This clamp is not the Hurricane ATB clamp, but this is the Velcro strap I used.
This clamp is not the Hurricane ATB clamp, but this is the Velcro strap I used.
Last edited by Scooper; 10-10-11 at 05:53 PM.
10-10-11, 10:23 PM
#27
Senior Member
Join Date: Sep 2010
Location: NE Indiana
Posts: 8,683
Bikes: 2020 Masi Giramondo 700c; 2013 Lynskey Peloton; 1992 Giant Rincon; 1989 Dawes needs parts; 1985 Trek 660; 1985 Fuji Club; 1984 Schwinn Voyager; 1984 Miyata 612; 1977 Raleigh Competition GS
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1125 Post(s)
Liked 248 Times
in
199 Posts
Performance 40-0330 Hurricane ATB Extra Mini Pump Mount. I used a Velcro strap to secure the pump to the mount. I also used a heat gun to soften the plastic so I could squeeze the clamps slightly to better fit the smaller diameter of the Road Morph G.
This clamp is not the Hurricane ATB clamp, but this is the Velcro strap I used.
This clamp is not the Hurricane ATB clamp, but this is the Velcro strap I used.
10-10-11, 11:37 PM
#28
Decrepit Member
After using the heat gun and squeezing the clamp claws a little closer together while heated, the clamps hold the pump securely. The Velcro is just added insurance.
10-11-11, 06:10 AM
#29
Senior Member
Join Date: Sep 2010
Location: NE Indiana
Posts: 8,683
Bikes: 2020 Masi Giramondo 700c; 2013 Lynskey Peloton; 1992 Giant Rincon; 1989 Dawes needs parts; 1985 Trek 660; 1985 Fuji Club; 1984 Schwinn Voyager; 1984 Miyata 612; 1977 Raleigh Competition GS
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1125 Post(s)
Liked 248 Times
in
199 Posts
Odd I searched like crazy and couldn't find it yesterday then just one search today and there it was. I finally found the correct mount for the Topeak Morph so you can mount the pump on the side of a water bottle cage. No heating of the cage clamps but getting the one Scooper recommended and heating the clamps is cheaper. But this is the correct one intended for the Morph: https://store.todson.com/store/wb-bra...ex-tpd-2c.html
10-11-11, 07:17 AM
#30
Decrepit Member
Odd I searched like crazy and couldn't find it yesterday then just one search today and there it was. I finally found the correct mount for the Topeak Morph so you can mount the pump on the side of a water bottle cage. No heating of the cage clamps but getting the one Scooper recommended and heating the clamps is cheaper. But this is the correct one intended for the Morph: https://store.todson.com/store/wb-bra...ex-tpd-2c.html
10-12-11, 02:12 PM
#31
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,773
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3580 Post(s)
Liked 3,392 Times
in
1,927 Posts
10-12-11, 02:31 PM
#32
what? NO!
Join Date: Apr 2010
Location: Hollywood, CA
Posts: 253
Bikes: 1988 Bridgestone RB-2 converted to ss
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Zefal makes one that is similar to that silca frame pump. It's nice because you dont need anything to mount it to the frame except one of those frame nipples. Someone knows what I'm talking about... But I've had good luck with mine. Just get the righ size for your frame and mount vertical Or horizontal.
10-12-11, 05:04 PM
#33
Senior Member
Join Date: Sep 2010
Location: NE Indiana
Posts: 8,683
Bikes: 2020 Masi Giramondo 700c; 2013 Lynskey Peloton; 1992 Giant Rincon; 1989 Dawes needs parts; 1985 Trek 660; 1985 Fuji Club; 1984 Schwinn Voyager; 1984 Miyata 612; 1977 Raleigh Competition GS
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1125 Post(s)
Liked 248 Times
in
199 Posts
Silca still makes a Impero pump, but it comes only with a aluminum barrel and a chrome handle. https://www.silcapompe.it/impero_en.htm
I still have a Impero in yellow with the Campy head that I bought in 81, but it's now for show, I don't use it anymore but it still works great.
One word of caution, I had another impero before the above mentioned one and it fit really tight, I hit a bump pretty hard and the pump went flying which resulted in its demise. I suggest using a velcro strap in the center just to make sure it stays on.
I still have a Impero in yellow with the Campy head that I bought in 81, but it's now for show, I don't use it anymore but it still works great.
One word of caution, I had another impero before the above mentioned one and it fit really tight, I hit a bump pretty hard and the pump went flying which resulted in its demise. I suggest using a velcro strap in the center just to make sure it stays on.
Last edited by rekmeyata; 10-12-11 at 05:08 PM.
