new to this not-shifting thing...
#1
Senior Member
Thread Starter
Join Date: Aug 2006
Location: Alexandria, VA
Posts: 1,210
Bikes: Firefly custom Road, Ira Ryan custom road bike, Ira Ryan custom fixed gear
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
new to this not-shifting thing...
Hi guys --
Been riding seriously about 5 years now. Started out at 245 or so, now down to 212. I have a steel road bike (Kona Kapu), an aluminum MTB and a custom lugged steel roadie built and on the way (with a stop over at NAHBS).
A couple of weeks ago one of my riding buddies spotted a lugged steel bike from the same builder on ebay. It's an older build from Ira Ryan, and is finished in a more classic brown, with a TT within 1/2 cm of what he is building for me.
And now it's mine. I've already changed out the stem and bars (silver) and need to change the crank arms as 165s are simply too short for me (I ride 175s on the road bike -- I'm about 6'3.5). Beyon that, plans are for a front brake and a bike for simple, fast workouts when I don't have 5 hours for a long ride.
It rides amazingly well -- feels very alive under me. Haven't come off yet, and have built up the confidence to ride with clip less on it, although I have yet to go anywhere but a local park for laps. So far have managed 22 miles, and got her up to 29.5 mph.
Any tips on how to set it up and how to get my brain used to not mashing up a hill and then stopping (without the ability to coast, that has given me a mighty shove a few times...)?
Been riding seriously about 5 years now. Started out at 245 or so, now down to 212. I have a steel road bike (Kona Kapu), an aluminum MTB and a custom lugged steel roadie built and on the way (with a stop over at NAHBS).
A couple of weeks ago one of my riding buddies spotted a lugged steel bike from the same builder on ebay. It's an older build from Ira Ryan, and is finished in a more classic brown, with a TT within 1/2 cm of what he is building for me.
And now it's mine. I've already changed out the stem and bars (silver) and need to change the crank arms as 165s are simply too short for me (I ride 175s on the road bike -- I'm about 6'3.5). Beyon that, plans are for a front brake and a bike for simple, fast workouts when I don't have 5 hours for a long ride.
It rides amazingly well -- feels very alive under me. Haven't come off yet, and have built up the confidence to ride with clip less on it, although I have yet to go anywhere but a local park for laps. So far have managed 22 miles, and got her up to 29.5 mph.
Any tips on how to set it up and how to get my brain used to not mashing up a hill and then stopping (without the ability to coast, that has given me a mighty shove a few times...)?
#2
Would you just look at it
Join Date: Aug 2011
Location: Denver
Posts: 1,554
Bikes: good ones.
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 21 Post(s)
Likes: 0
Liked 5 Times
in
2 Posts
Looks awesome. You'll get used to the lack of coasting soon enough.
Depending on what you plan on using this bike, I'd change up the gearing accordingly. If you're looking for short, intense workouts, up the gearing and go tackle some hills. Just be careful going back down them without brakes if your gearing is too steep.
Depending on what you plan on using this bike, I'd change up the gearing accordingly. If you're looking for short, intense workouts, up the gearing and go tackle some hills. Just be careful going back down them without brakes if your gearing is too steep.
#3
Elitist
Join Date: Jul 2005
Location: Atlanta, GA
Posts: 15,965
Mentioned: 88 Post(s)
Tagged: 0 Thread(s)
Quoted: 1386 Post(s)
Liked 92 Times
in
77 Posts
You'll be fine. The key is to make sure that your gearing is sufficiently low for the hills that you plan to ride. What is the gearing on your bike?
#4
Senior Member
Thread Starter
Join Date: Aug 2006
Location: Alexandria, VA
Posts: 1,210
Bikes: Firefly custom Road, Ira Ryan custom road bike, Ira Ryan custom fixed gear
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks, guys. Gearing is 49x17. Feels about right -- sustained on flats is comfy cadence-wise around 15-17mph, and with a high spin 30 seems doable.
#5
Senior Member
That's awesome going fixed is so fun I remember my first couple rides were awesome not knowing how to stop and learning how to slow down and ride safe. I would try to just get use to the crank arms if I were you instead of spending more money unless you have it. I ride a thrasher trick bike to commute with 160 crank arms that came with it. Then i'll switch to my surly steamroller with 170s and I notice a difference at first then after a few minutes im fine and it doesn't bother me.
Thread
Thread Starter
Forum
Replies
Last Post
timacn
Cyclocross and Gravelbiking (Recreational)
7
05-13-19 08:10 AM
mthayer
Long Distance Competition/Ultracycling, Randonneuring and Endurance Cycling
8
03-28-11 09:10 PM