Bike Forums

Bike Forums (http://www.bikeforums.net/forum.php)
-   Southeast (http://www.bikeforums.net/southeast/)
-   -   Any Recommendations on Reasonable (Low) Cost Powder Coaters in the NC/SC/GA area? (http://www.bikeforums.net/southeast/799197-any-recommendations-reasonable-low-cost-powder-coaters-nc-sc-ga-area.html)

wrk101 02-16-12 08:10 PM

Any Recommendations on Reasonable (Low) Cost Powder Coaters in the NC/SC/GA area?
 
I split time between western NC and the upstate of SC, but am also routinely traveling to Atlanta and Charlotte. I picked up a 1987 Schwinn Tempo, paint was basically destroyed, and am considering having it powdercoated. It really depends on whether I can find someone at a reasonable cost.

Any recommendations and approx cost for a frame and fork would be appreciated.


bill

kjc9640 02-17-12 12:52 PM

Quote:

Originally Posted by wrk101 (Post 13861749)
I split time between western NC and the upstate of SC, but am also routinely traveling to Atlanta and Charlotte. I picked up a 1987 Schwinn Tempo, paint was basically destroyed, and am considering having it powdercoated. It really depends on whether I can find someone at a reasonable cost.

Any recommendations and approx cost for a frame and fork would be appreciated.


bill

I cannot speak for your area but I just had a frame and fork done last month in Orlando, 2 colors. One solid color should be cheaper.

wrk101 02-18-12 08:53 PM

I am definitely going to stick with one color.

sedges 02-18-12 10:54 PM

Diversified Powder Coating 5705 Bethelview Road, Cumming, GA 30040 (770) 887-7722 ‎

Never done business with these folks, but they seem to do a lot of motorcycle frames and parts.

Phillyfan 02-16-13 08:32 AM

Quote:

Originally Posted by kjc9640 (Post 13864470)
Quote:

Originally Posted by wrk101 (Post 13861749)
I split time between western NC and the upstate of SC, but am also routinely traveling to Atlanta and Charlotte. I picked up a 1987 Schwinn Tempo, paint was basically destroyed, and am considering having it powdercoated. It really depends on whether I can find someone at a reasonable cost.

Any recommendations and approx cost for a frame and fork would be appreciated.


bill

I cannot speak for your area but I just had a frame and fork done last month in Orlando, 2 colors. One solid color should be cheaper.

Where at in Orlando?

DKMcK 02-16-13 09:47 AM

I had an old Raleigh done by Drake Coatings in Monroe a couple years ago for about $60 (I don't remember the exact amount). I was pleased with the work.

http://www.drakecoatings.com/

Dwight


All times are GMT -6. The time now is 01:16 PM.