How would/does a Nexus 8 fare on a tandem?
07-13-07, 07:43 PM
#1
Sir Fallalot
Thread Starter
Join Date: Jul 2006
Posts: 5,286
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 13 Times
in
11 Posts
How would/does a Nexus 8 fare on a tandem?
If I built a rear wheel with a Shimano Nexus 8 gear hub, could I expect it to last, on a tandem, or is it too sensitive?
I'm asking because I just happened to have one laying around, and I want to replace the front+rear derailleur setup on a tandem.
The Nexus 8 has a rollerbrake.
Maybe I should ask this in the mechanics' forum?
I'm asking because I just happened to have one laying around, and I want to replace the front+rear derailleur setup on a tandem.
The Nexus 8 has a rollerbrake.
Maybe I should ask this in the mechanics' forum?
07-13-07, 08:33 PM
#2
hors category
Join Date: Jan 2002
Posts: 7,231
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Likes: 0
Liked 5 Times
in
5 Posts
I'm not positive, but as best as I can recall I believe the Nexus hubs have max RIDER weight limitations that fall somewhere between 190lbs - 250lbs (a quick check yielded a range of weights for the 3, 7 & 8 speed models). I'm not sure if the weight limitation pertains to the hub brakes or the hub itself.
Edit: Added "Rider" to answer next question.
Edit: Added "Rider" to answer next question.
Last edited by TandemGeek; 07-14-07 at 06:45 AM.
07-14-07, 02:09 AM
#3
Sir Fallalot
Thread Starter
Join Date: Jul 2006
Posts: 5,286
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 13 Times
in
11 Posts
Originally Posted by TandemGeek
I'm not positive, but as best as I can recall I believe the Nexus hubs have max weight limitations that fall somewhere between 190lbs - 250lbs (a quick check yielded a range of weights for the 3, 7 & 8 speed models). I'm not sure if the weight limitation pertains to the hub brakes or the hub itself.
EDIT: if the weight limit pertains to the brake, then the "weight" thing is clear: it's about the total weight of bike+rider(s).
07-14-07, 07:29 AM
#4
hors category
Join Date: Jan 2002
Posts: 7,231
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Likes: 0
Liked 5 Times
in
5 Posts
The the only hard and fast reference I could find in about 5 minutes pertains to the Inter-M roller brake. It's not so much a limit as it is a warning that the brake was only designed to meet a specification for a total weight of 100kg, after which the brake may not perform as designed (extract below). It would probably be a good idea to contact Shimano's tech support folks and ask them flat out: Is there a max torque / weight limit on the Nexus 8?
Like the Rohloff, the constraints seem to be spoke count and drop-out spacing. The Redline uses improved bearings designed to support off-road use of the hub so that's a plus. The drop-out spacing is something of a "tweener" in that at 132.5mm it falls 1/2 way between the road spec of 130mm and off-road spec of 135mm to seemingly fit both. Trying to put one on a tandem with 145mm spacing would obviously be something that would require technical direction/advise from Shimano. The 36h spoke count isn't as big of a concern because the hub's flanges are tall enough to yield a wheel that's probably as strong as any 40h tandem wheel.
Here's a link to a fairly detailed review of the Nexus 8 Redline used on a single bike: https://forums.mtbr.com/showpost.php?...3&postcount=78
As for weight limits in general, I can't recall seeing any bicycle tires with weight limits, but with respect to rims and wheelsets the often times cited limits of 180lbs - 200lbs always assume a bicycle with two wheels and tied the weight to the rider. This may vary from manufacturer to manufacturer but they usually specify, such as American Classic does in their tables: https://www.amclassic.com/pdfs/WheelWeights.pdf
Like the Rohloff, the constraints seem to be spoke count and drop-out spacing. The Redline uses improved bearings designed to support off-road use of the hub so that's a plus. The drop-out spacing is something of a "tweener" in that at 132.5mm it falls 1/2 way between the road spec of 130mm and off-road spec of 135mm to seemingly fit both. Trying to put one on a tandem with 145mm spacing would obviously be something that would require technical direction/advise from Shimano. The 36h spoke count isn't as big of a concern because the hub's flanges are tall enough to yield a wheel that's probably as strong as any 40h tandem wheel.
Here's a link to a fairly detailed review of the Nexus 8 Redline used on a single bike: https://forums.mtbr.com/showpost.php?...3&postcount=78
As for weight limits in general, I can't recall seeing any bicycle tires with weight limits, but with respect to rims and wheelsets the often times cited limits of 180lbs - 200lbs always assume a bicycle with two wheels and tied the weight to the rider. This may vary from manufacturer to manufacturer but they usually specify, such as American Classic does in their tables: https://www.amclassic.com/pdfs/WheelWeights.pdf
Last edited by TandemGeek; 07-14-07 at 11:05 AM.
07-14-07, 11:28 PM
#5
Sir Fallalot
Thread Starter
Join Date: Jul 2006
Posts: 5,286
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 13 Times
in
11 Posts
Originally Posted by TandemGeek
The 36h spoke count isn't as big of a concern because the hub's flanges are tall enough to yield a wheel that's probably as strong as any 40h tandem wheel.
Originally Posted by TandemGeek
Here's a link to a fairly detailed review of the Nexus 8 Redline used on a single bike: https://forums.mtbr.com/showpost.php?...3&postcount=78
Originally Posted by TandemGeek
As for weight limits in general, I can't recall seeing any bicycle tires with weight limits, but with respect to rims and wheelsets the often times cited limits of 180lbs - 200lbs always assume a bicycle with two wheels and tied the weight to the rider. This may vary from manufacturer to manufacturer but they usually specify, such as American Classic does in their tables: https://www.amclassic.com/pdfs/WheelWeights.pdf
07-16-07, 04:59 AM
#6
Senior Member
Join Date: Dec 2005
Location: London, UK
Posts: 563
Bikes: Trek T200 plus enough others to fill a large shed
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
If you fancy trying one for rides round the park and gentle road trips I would just go for it, since this sort of riding isn't going to stress it as highly as a fit MTBer giving it grief. However the application would be experimental and if you're heading far from home say doing a touring trip, it's probably worth ponying up for a Rohloff.
07-16-07, 06:02 AM
#7
Sir Fallalot
Thread Starter
Join Date: Jul 2006
Posts: 5,286
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 13 Times
in
11 Posts
Okay, I know the Rohloff Speedhub is teh bestest, but I just don't have the money for it.
Is there any other hub gear, apart from Rohloff, that is sturdy? I don't need the huge span in gear ratios that the Rohloff offers. Heck, not even the 300%+change of the Nexus 8 is necessary. I just need it to be strong, and cheap. I also have a wheel with a SRAM S7. How does that fare, in the robustness department?
Is there any other hub gear, apart from Rohloff, that is sturdy? I don't need the huge span in gear ratios that the Rohloff offers. Heck, not even the 300%+change of the Nexus 8 is necessary. I just need it to be strong, and cheap. I also have a wheel with a SRAM S7. How does that fare, in the robustness department?
