Some help with a Cannondale Build
#1
Rouleur
Thread Starter
Some help with a Cannondale Build
My buddy and I picked up an RT3000 frame, and we are cobbling together a tandem.
I know the front crank is going to need an Eccentric BB, since I have abosultely no experience with these I'm not sure what I am looking for. I'd appreciate it if somebody could point me in the right direction.
Thanks
Matt
I know the front crank is going to need an Eccentric BB, since I have abosultely no experience with these I'm not sure what I am looking for. I'd appreciate it if somebody could point me in the right direction.
Thanks
Matt
#3
Flandrien
Join Date: Jan 2007
Location: Geneva, Switzerland
Posts: 81
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Cannondale eccentric pdf
Have a look at this. It should give you all the info you require. Hope it helps.
https://www.cannondale.com/asset/iu_f...plement_en.pdf
https://www.cannondale.com/asset/iu_f...plement_en.pdf
#4
Senior Member
Join Date: Mar 2005
Posts: 61
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Gattm99:
In addition to the source previously given:
https://www.rodcycle.com/eccentric.html for the Bushnell Eccentric,
also https://aebike.com/page.cfm?PageID=30...ils&sku=FS1353
or https://aebike.com/page.cfm?PageID=30...ils&sku=FS3003
prairie*boy
In addition to the source previously given:
https://www.rodcycle.com/eccentric.html for the Bushnell Eccentric,
also https://aebike.com/page.cfm?PageID=30...ils&sku=FS1353
or https://aebike.com/page.cfm?PageID=30...ils&sku=FS3003
prairie*boy