schwinn twin hub
11-30-09, 02:22 AM
#1
Newbie
Thread Starter
Join Date: Nov 2009
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
schwinn twin hub
I have a Schwinn Twinn which had V-brakes welded onto it and custom 26" double wall wheels built about 3 years ago. Rafael Vazquez from Chelsea Bikes in NYC did the welding, wheel bulding, etc. I was VERY pleased with the improvements in comparison to original rear drum brake system. I am able to safely stop with either the front or rear brakes.
After 3 years I finally bent the axle on the rear 36 holed SUZUE pro max freewheel hub and cracked the lock nut. Figuring that I can solve this issue myself I My issue is that the axle
(fyi -- I'm not interested in hearing how I should have just gotten another tandem and left this one alone :/)
After 3 years I finally bent the axle on the rear 36 holed SUZUE pro max freewheel hub and cracked the lock nut. Figuring that I can solve this issue myself I My issue is that the axle
(fyi -- I'm not interested in hearing how I should have just gotten another tandem and left this one alone :/)
12-01-09, 06:15 PM
#3
Senior Member
Join Date: Dec 2003
Location: Tucson, AZ
Posts: 11,016
Bikes: Custom Zona c/f tandem + Scott Plasma single
Mentioned: 3 Post(s)
Tagged: 1 Thread(s)
Quoted: 77 Post(s)
Likes: 0
Liked 19 Times
in
11 Posts
If you-2 are happy, that's all that really matters!
Pedal on TWOgether!
Rudy and Kay/zonatandem
Pedal on TWOgether!
Rudy and Kay/zonatandem
