Cups/Bearings for Canondale EBB
#1
AussieTandem
Thread Starter
Join Date: Jun 2008
Location: Queensland, Australia
Posts: 18
Bikes: Cannondale RT2, Avanti Flat Bar, Specialized Roubaix SL2 Expert Disc, Malvern Star Oppy, Trek 7.2 Disc, Scott MTB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Cups/Bearings for Canondale EBB
Looking for advice on how we purchase the correct cups/bearings for our replacement Canondale EBB just purchased through Tandems East. We are running Truvativ Elita so are thinking we need Truvativ GPX. Problem is some sites talk about 'outboard' and we're not sure what that means. We know there is new ceramic technology available but don't really want to go to that expense if we don't have to. Also, we've read that the captain's cups are possibly different to the stoker's. Is this correct? Any advice would be appreciated.
#2
Senior Member
Join Date: Apr 2009
Posts: 712
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Most any outboard bearing BB will work if your bike has the cranks to go with them. If you dont have that type, most any BB will work given the correct spindle length and type. No ceramic bearings here, they hate water, are nor user friendly. Need service every 40hrs. Both front and rear should be the same.
Thread
Thread Starter
Forum
Replies
Last Post
Lewis_Moon
Classic & Vintage
8
09-25-12 05:19 PM