undefinedOriginally Posted by supcom
I just investigated the PCT method and after finally figuring it out with the help of some little diagrams of my own it seems pretty effective. My only concern is that most cycle campers have to hang both front panniers since after a while they both reek of food. I find that hauling a set of full fronts up over a branch creates so much friction that I usually either break the branch, fray the rope or cause blisters to appear on my tender hands! My method is heavier, uses two ropes which have to be tied to something and yes, a smart bear might figure out the key ........ but here it is for whatever it is worth: attach a small mountaineering pulley to one end of a length of accesorry cord. Attach a biner to the end of the second cord. If your pulley isn't heavy enough place it in a little drawstring bag with a rock. Throw this over a branch and lower the pulley end to the ground. Place second cord through the pulley and holding the free end, raise the pulley up to the branch. Tie off the pulley cord. Feed the biner through the loops of the panniers and hook it to the cord. Pull the free end up until the bags reach the pulley. Tie off second cord. Hope I explained that well enough. It's actually easy. I've stowed 4 loaded front panniers this way.