Velo Orange Fender Installation!
#1
Senior Member
Thread Starter
Join Date: Nov 2007
Posts: 68
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Velo Orange Fender Installation!
Anyone have experience installing these fenders or ones like them?
Trying to put them on my bob jackson tourist and the front fender doesn't follow the arc of the front tire like the jackson in this photo.
https://flickr.com/photos/dancingweap...on/1101462620/
any ideas on how I can get it to?
thanks in advance.
zac
Trying to put them on my bob jackson tourist and the front fender doesn't follow the arc of the front tire like the jackson in this photo.
https://flickr.com/photos/dancingweap...on/1101462620/
any ideas on how I can get it to?
thanks in advance.
zac
#2
Senior Member
Join Date: Jun 2004
Posts: 1,293
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
First off, fitting fenders to a bike correctly is among the hardest things you can do in building a bike. It's easier to install shifters and derailers! So don't get down about it.
I like to use wine corks to space any big gaps--- just cut sections to fit the space (remember to try to fit the curve of the fender) drill holes in the middle for longer bolts and use Teflon nuts. You may want to run to the hardware store while you're out getting that wine. Zip ties are though of as getto by some, but they can work as well.
I've been told by a shop guy who really knows bikes that both Rene Herse and Alex Singer used cork installing fenders, so you're BK will be in good company.
Good luck
I like to use wine corks to space any big gaps--- just cut sections to fit the space (remember to try to fit the curve of the fender) drill holes in the middle for longer bolts and use Teflon nuts. You may want to run to the hardware store while you're out getting that wine. Zip ties are though of as getto by some, but they can work as well.
I've been told by a shop guy who really knows bikes that both Rene Herse and Alex Singer used cork installing fenders, so you're BK will be in good company.
Good luck
#3
Banned
Join Date: Aug 2005
Posts: 5,115
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times
in
1 Post
Many modern fenders only have the one tie wire. you really don't need much fender forward of the fork, so many are designed short and not stayed. I use double attachment points at the fork, front and back of the crown to attach short fenders. I am speaking of the tabs that attach the fenders, not the wires/ties/stays in the photo. This allows me to dictate some rake ahead of the crown.
Of course if you have the room and the fittings, more points of attachment are better. I also run the tie wires to my rack if I install a front rack.
Of course if you have the room and the fittings, more points of attachment are better. I also run the tie wires to my rack if I install a front rack.
#4
Senior Member
Order a few back issues of Bicycle Quarterly that have instructions on how to install metal fenders. The content of the rest of the magazine is well worth the cost. You are not going to find a Bicycling! magazine article on fenders.
#5
Senior Member
Thread Starter
Join Date: Nov 2007
Posts: 68
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
So here is a pic of the Bob Jackson with fenders - Hope to get out for a tour this summer on it.
https://www.flickr.com/photos/7491459...7603637508250/
Took me a while and was glad to be interrupted by my daughter on multiple occasions - it allowed me time to reflect on my approach and come up with solutions that really worked - well we'll see after a real ride.
Thanks for ya'lls help!
zac
https://www.flickr.com/photos/7491459...7603637508250/
Took me a while and was glad to be interrupted by my daughter on multiple occasions - it allowed me time to reflect on my approach and come up with solutions that really worked - well we'll see after a real ride.
Thanks for ya'lls help!
zac
#6
Long Live Long Rides
Join Date: Apr 2004
Location: KCMO
Posts: 718
Bikes: 1988 Specialized Rockhopper Comp, converted for touring/commuting. 1984 Raleigh Team USA road bike.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
That is one nice rig. Any idea what year it might be? I've always liked wide flanged hubs.
Nice job!
Jerry H
Nice job!
Jerry H