Tire directionality
#1
Senior Member
Thread Starter
Join Date: Mar 2007
Location: Saskatchewan
Posts: 2,465
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 6 Times
in
5 Posts
Tire directionality
Does it matter?
I noticed that the front tire on my new Sherpa is mounted with the arrow facing the wrong way. The back one is right but the front tire is backwards.
The tires are Kenda Kompact.
I noticed that the front tire on my new Sherpa is mounted with the arrow facing the wrong way. The back one is right but the front tire is backwards.
The tires are Kenda Kompact.
#2
cyclopath
Join Date: Apr 2006
Location: Victoria, BC
Posts: 5,264
Bikes: Surly Krampus, Surly Straggler, Pivot Mach 6, Bike Friday Tikit, Bike Friday Tandem, Santa Cruz Nomad
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 6 Times
in
6 Posts
I wouldn't sweat it on a fairly smooth road tire, OTOH if you have rim brakes just flip the whole wheel around and swap the QR so the lever is back on the left. The front hub doesn't care which way it rotates.
#3
JRA.
Join Date: Nov 2007
Location: Boston, MA
Posts: 505
Bikes: '07 IRO Mark V, '01 Cannondale Jekyll 3000, '07 Rivendell Atlantis
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
+1
__________________
2009 Bike Friday Season Tikit (commuting folder)
2007 Rivendell Atlantis (touring, general riding, errand runner, stuff hauler)
2007 IRO Mark V (SS)
2006 Rockhopper Comp Disc (Icebike)
2009 Bike Friday Season Tikit (commuting folder)
2007 Rivendell Atlantis (touring, general riding, errand runner, stuff hauler)
2007 IRO Mark V (SS)
2006 Rockhopper Comp Disc (Icebike)
#4
Senior Member
Thread Starter
Join Date: Mar 2007
Location: Saskatchewan
Posts: 2,465
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 6 Times
in
5 Posts
I think I will pull it off the rim and swap it.
I am traditional in the fact that the labels should be read from the right hand side..........
Oh well.
I am traditional in the fact that the labels should be read from the right hand side..........
Oh well.
#5
Slow Rider
#6
Senior Member
why then are the arrow's on the tyre in the first place,i would take it off have the arrows faceing the same waythat make's sense to me .
#7
Senior Member
Join Date: Feb 2008
Posts: 61
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Unless you're doing 70 mph + in hard rain it shouldn't be an issue.
I normally disable the rocket motors on my ride when I screw up the arrows and pedal in the rain.
...but seriously... Flip it next time you get a flat, not a big deal.
I normally disable the rocket motors on my ride when I screw up the arrows and pedal in the rain.
...but seriously... Flip it next time you get a flat, not a big deal.
Last edited by xiaodidi; 03-14-08 at 01:22 AM.
#8
Senior Member
Flipping is not that simple... if you run a computer magnet and sensor.
I have noticed with unidirectional treaded tyres that I mount on the rear with the incorrect rotation that the wear is accelerated. I would also suggest that in wet weather, tyre performance might be compromised because the siping grooves would not work as efficiently.
And I suspect that the undirectionality might have something to do with the lay of the threads in the tyre casing and how they behave in terms of "suspension".
I have noticed with unidirectional treaded tyres that I mount on the rear with the incorrect rotation that the wear is accelerated. I would also suggest that in wet weather, tyre performance might be compromised because the siping grooves would not work as efficiently.
And I suspect that the undirectionality might have something to do with the lay of the threads in the tyre casing and how they behave in terms of "suspension".
#9
Just ride it.
Join Date: May 2006
Posts: 335
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Remember that directional tires mean you can't cross-rotate. Yeah... it's Friday in Polakland.
On a more serious note, directional tires usually have some sort of V-shape sipes, such as Conti Top Touring 2000, which are meant to pump water away from the center of the tire. The pointy tip of the V contacts the road first and as the tire rotates the sipes push the water out. This configuration might also give a smoother ride. The rear tire is reversed because the spread part of the V contacts the riding surface first and is supposed to give you more bite enhancing propulsive traction. This also means the front tire might have more bite when braking. How much this means in the real world I've yet to discern after years of riding, but it sure looks good on a parked bike.
On a more serious note, directional tires usually have some sort of V-shape sipes, such as Conti Top Touring 2000, which are meant to pump water away from the center of the tire. The pointy tip of the V contacts the road first and as the tire rotates the sipes push the water out. This configuration might also give a smoother ride. The rear tire is reversed because the spread part of the V contacts the riding surface first and is supposed to give you more bite enhancing propulsive traction. This also means the front tire might have more bite when braking. How much this means in the real world I've yet to discern after years of riding, but it sure looks good on a parked bike.
#10
cyclopath
Join Date: Apr 2006
Location: Victoria, BC
Posts: 5,264
Bikes: Surly Krampus, Surly Straggler, Pivot Mach 6, Bike Friday Tikit, Bike Friday Tandem, Santa Cruz Nomad
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 6 Times
in
6 Posts
Why not? It takes all of 2 seconds to unmount a computer magnet and remount on the other side once you've flipped the front wheel around. I've shared computer magnets between bikes for a while - swapping them on/off is trivial.
#11
Senior Member
2 seconds? You must be a magician. I couldn't do it in that time with a screw-on magnet, nor the one with the little metal sleeve that slips over the plastic housing, nor the one encased in a plastic fitting that goes across two spokes and also has a screw to clamp it together.
What brand of magnet are you talking about?
Mounting the tyre so you don't have to swap QRs and magnets also is pretty trivial. And permanent.
What brand of magnet are you talking about?
Mounting the tyre so you don't have to swap QRs and magnets also is pretty trivial. And permanent.