Pedals
#1
Weebles wobble...
Thread Starter
Join Date: Feb 2004
Location: South Florida
Posts: 91
Bikes: 04 Surly Cross-check, circa 1969 Columbia Commuter III
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Pedals
Has anyone tried the MKS Sylvan Tour Wide Pedals & XL Steel Toe Clips shown on the attached link?
I was wondering if they would be prone to scraping while cornering on my Surly Cross-check.
Also, what is your opinion of putting a Brooks B-17 saddle on this bike.
https://www.yellowjersey.org/toeclip.html
I was wondering if they would be prone to scraping while cornering on my Surly Cross-check.
Also, what is your opinion of putting a Brooks B-17 saddle on this bike.
https://www.yellowjersey.org/toeclip.html
#2
Slow and unsteady
Join Date: Nov 2002
Location: St Louis, MO
Posts: 473
Bikes: Bacchetta Agio, Bacchetta Giro 20, Trek 520
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I use similar but cheaper pedals on my bike. And plastic clips instead of steel.
As far as scraping on corners, that usually occurs when racing and you're trying to pedal through a sharp curve. Whether or not you scrape also depends on bottom bracket height, crank length, how sharply you lay your bike over, etc. I just cruise around and don't pedal through sharp turns.
I prefer clips/straps and like a wider platform, so these pedals would be OK for me. I've used steel clips in the past and don't recall any problems.
As for the saddle, that seems to be a matter of personal preference. Even more personal that choice of pedals
As far as scraping on corners, that usually occurs when racing and you're trying to pedal through a sharp curve. Whether or not you scrape also depends on bottom bracket height, crank length, how sharply you lay your bike over, etc. I just cruise around and don't pedal through sharp turns.
I prefer clips/straps and like a wider platform, so these pedals would be OK for me. I've used steel clips in the past and don't recall any problems.
As for the saddle, that seems to be a matter of personal preference. Even more personal that choice of pedals
#3
this bike is an aqueduct
Join Date: Jan 2004
Location: Gainesville, FL
Posts: 1,073
Bikes: Villin custom touring, Medici Pro Pista, KHS Alite1000, Windsor fixed commuter
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times
in
1 Post
There are probably those who could convincingly argue for using a B17 on a dentist's chair, let alone a cross frame.
But they're pretty much the way to go, touring-wise.
Matt
But they're pretty much the way to go, touring-wise.
Matt
__________________
Villin custom touring | Raleigh XXIX | Medici Pro Pista | 1978 Schwinn Stingray
Villin custom touring | Raleigh XXIX | Medici Pro Pista | 1978 Schwinn Stingray
#4
X-Large Member
Join Date: Oct 2003
Location: NYC, NY
Posts: 580
Bikes: 2004 Rivendell Atlantis, 2004 Thorn eXp, 2004 Bob Brown Cycles Custom
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I use the MKS Touring pedals with Power Grips and they are far superior to any toe clips-steel, aluminum, resin-I've ever used. Easier to get in and out of too. Also, if you're pedaling those first few rotations with your pedals upside down the Power Grips just float along underneath without the huge, wanking scrapping sound (and wear & tear) that you encounter with clips.
Try 'em, you'll like 'em!
BTW, install the Power Grips inside out so the logo isn't visible if that sorta thing bugs you... it does me.
Try 'em, you'll like 'em!
BTW, install the Power Grips inside out so the logo isn't visible if that sorta thing bugs you... it does me.
#5
Senior Member
Join Date: Feb 2001
Location: England
Posts: 12,948
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 19 Post(s)
Likes: 0
Liked 7 Times
in
7 Posts
I use the Sylvians with Christophe metal clips and leather straps. Cornering clearance is adaquate, but I do bump the pedals under unusual circumstances, eg riding over a small speed bump, cornering on a steep camber, basically all the places you should keep your inside pedal UP. I do plenty of trail riding with this bike and clearance is not a problem.
A cross bike should have a higher bottom bracket than a tourng bike, so you may have better clearance.
The pedals are tough, light, durable and good value.
A cross bike should have a higher bottom bracket than a tourng bike, so you may have better clearance.
The pedals are tough, light, durable and good value.
#6
Senior Member
Join Date: May 2004
Location: Buffalo, NY USA
Posts: 173
Bikes: LeMond Nevada city
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
got my power grips, only to discover that my cage is too small.
Returning the Powergrips and getting the kit is not really a good option for me.
Can anybody recommend a nice roomy pedal/cage that works well with power grips?
I have size 12 feet, and wear trail sneakers just to make it worse
Nothing beats a 20 mile ride so you can go on your favorite hike.
Returning the Powergrips and getting the kit is not really a good option for me.
Can anybody recommend a nice roomy pedal/cage that works well with power grips?
I have size 12 feet, and wear trail sneakers just to make it worse
Nothing beats a 20 mile ride so you can go on your favorite hike.