Rear Derailleur ?
#1
Senior Member
Thread Starter
Join Date: Jun 2009
Location: Madison, WI
Posts: 146
Bikes: Felt F2, Gunnar Fastlane
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Rear Derailleur ?
Hi....
Just in the process of putting my new rig together. I am using a Ultegra SL Triple [50/39/30] with an IRD 11-34 rear cassette. I am looking at the Shimano Ultegra SL "long cage" rd. It states total capacity of 37t. When I do the math I am looking at 46t which the XTR M970SGS is rated at.
Using triple brifters, can I use the XTR which states it works for 7/8/9 spd. I have been told by a few mechs that it doesn't matter and will work. The Ultegra GS will work as well but need to stay out of the cross combos eg small and small etc. Please feel free to comment. Thanks in advance!
Just in the process of putting my new rig together. I am using a Ultegra SL Triple [50/39/30] with an IRD 11-34 rear cassette. I am looking at the Shimano Ultegra SL "long cage" rd. It states total capacity of 37t. When I do the math I am looking at 46t which the XTR M970SGS is rated at.
Using triple brifters, can I use the XTR which states it works for 7/8/9 spd. I have been told by a few mechs that it doesn't matter and will work. The Ultegra GS will work as well but need to stay out of the cross combos eg small and small etc. Please feel free to comment. Thanks in advance!
#3
Senior Member
Thread Starter
Join Date: Jun 2009
Location: Madison, WI
Posts: 146
Bikes: Felt F2, Gunnar Fastlane
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks! I see that the specs for the XTR are 45t not 46 as i previously mentioned. One other question... i have some 11t ceramic pulleys. would these be compatible?? I believe they would be but would like to get an answer to back this up. thanks again for the quick reply.
Model Number RD-M972-SGS Series XTR Shifting Action Top Normal Mount Type Drop-out Maximum Sprocket 34T Minimum Sprocket 11T Front Difference 22T maximum Total Capacity 45T Guide Pulley sealed bearing Tension Pulley sealed bearing Pulley Bolts stainless steel Pulley Bolts Retainer yes Bracket Body cold forged aluminum/color anodized Bracket Pivot Seal double O-rings Plate Body cold forged aluminum/color anodized Plate Pivot Bolt aluminum Plate Pivot Seal single O-ring Outer Link cold forged aluminum/anodized Inner Link cold forged aluminum/anodized Link Pin Bushings fluorine coated (4) Outer Plate carbon Inner Plate carbon Average Weight 182g
Last edited by sheller73; 08-12-09 at 05:51 PM.