Advertise on Bikeforums.net



User Tag List

Results 1 to 3 of 3
  1. #1
    Senior Member
    Join Date
    Nov 2009
    Posts
    213
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Specs for 2010 Nashbar touring fork (NB-TFF)

    If you were looking at the 2010 version of the Nashbar touring fork (NB-TFF), here's some specs for you to consider (and yes, it is steel).

    • 1185g uncut
    • Total length of fork is 28.06" (compared with 28.75" on previous models)
    • 0.5" less tire clearance from previous models (2.69" of clearance above center of brake mount vs. 3.19" of clearance on previous models; in practical terms, this means that the fork gives you 5/8" of clearance for a 700x32 Panaracer T-Serv tire)
    • 1" lower braze-on mounts (5" from center of brake mount to braze-on mount vs. 4" on previous models)
    • Two M5x16mm bolts included (in braze-on mounts)
    • 300mm steer tube

  2. #2
    Senior Member cnnrmccloskey's Avatar
    Join Date
    May 2009
    Location
    Portland Oregon
    My Bikes
    '82 Giante super challange, 70 Gitane Tour de France, GT Gutterball
    Posts
    745
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Crown race seat diameter?
    Quote Originally Posted by Braden1550 View Post
    Monocoque unicycles with internal gear hubs, ridden by extortionists with an excellent sense of balance.

    You'll see. Unless you drilled out your eyes because they were too heavy.

  3. #3
    Senior Member
    Join Date
    Nov 2009
    Posts
    213
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by cnnrmccloskey View Post
    Crown race seat diameter?
    30mm, just as Nashbar says.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •