Light Touring Caliper Brakes?
#1
Senior Member
Thread Starter
Join Date: Jun 2009
Location: Montereyish
Posts: 2,306
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Light Touring Caliper Brakes?
I’m going to try and build a vintage steel road bike that is capable of handling a pannier load of say 25 lbs. One of the issues that I will have to address is that this particular frame takes caliper brakes only. The frame had 27” wheels originally, but I plan on using 700’s. I don’t have the frame yet, so I can’t measure the distance the brakes will have to reach, but I suspect that a mid-reach caliper would work. My question is; what are some options for a strong caliper brake, either modern or vintage, that would be considered safe for touring applications?
#2
Goes to 11.
Join Date: Oct 2010
Location: Wichita, KS, USA
Posts: 2,547
Bikes: 2015 Soma Double Cross
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I'd probably go with something like a Dia-Compe 610 centerpull.
#3
Senior Member
rothenfield1, I'd prefer a dual pivot caliper. Tektro makes a good one for not a lot of money.
Brad
Brad
#4
Senior Member
Join Date: Aug 2006
Location: Central Coast, CA
Posts: 3,392
Bikes: Surly LHT, Specialized Rockhopper, Nashbar Touring (old), Specialized Stumpjumper (older), Nishiki Tourer (model unknown)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
I had a touring bike that had caliper brakes. It worked fine. I think they were sidepulls.
#5
Banned
Pauls Racers, a centerpull, CNC mfg. in California.
made in 2 reach designs.
of course you can just replace the Mafac racers or Whatever were on there
or,as leeG offers, get a dual pivot sidepull Tektro has many.
not exclusive to that vendor. VO
made in 2 reach designs.
of course you can just replace the Mafac racers or Whatever were on there
or,as leeG offers, get a dual pivot sidepull Tektro has many.
not exclusive to that vendor. VO
Last edited by fietsbob; 12-29-11 at 02:42 PM.
#7
Senior Member
Thread Starter
Join Date: Jun 2009
Location: Montereyish
Posts: 2,306
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Thank you for the replies. I forgot to mention that this old frame only takes nutted brakes unless I drill it out, which I’m not inclined to do, but it looks like both the Tektros and Dia-Compes referenced would work. It sounds like center-pulls or dual pivots have adequate stopping power, if set-up properly, to handle a light load. I like the looks of those Dia-Compe 610s, but $75 each…Hmmm.
#8
Senior Member
Join Date: Feb 2001
Location: England
Posts: 12,948
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 19 Post(s)
Likes: 0
Liked 7 Times
in
7 Posts
My Shimano 105 long reach calipers are as powerful as the Tektro 720 cantilevers on my tourer + they offer easier setup and better control. I can fit 32mm tyres+ sks full fenders. If your reach is within the limit for this brake, I can recommend it. I have the nutted version which is getting harder to find.
#9
Senior Member
Thread Starter
Join Date: Jun 2009
Location: Montereyish
Posts: 2,306
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
It just shows you how little I know. I had assumed that I would need calipers for a bike sans brake bosses. And then I got a little education about center pulls. I’m currently looking at a used set of these…https://www.ebay.com/itm/180775691120
But calipers are still in the running.
But calipers are still in the running.
#10
Bicyclerider4life
Center Pulls. Weinneman or Dia Compe either will work without having to drill out the frame.
__________________
"Whenever I see an adult riding a bicycle, I know there is hope for mankind." (H. G. Wells)
"Whenever I see an adult riding a bicycle, I know there is hope for mankind." (H. G. Wells)
Thread
Thread Starter
Forum
Replies
Last Post
floyd0117
Road Cycling
5
10-18-16 08:08 PM