Suntour Superbe Pro hub help!
I'm in desperate need of a cone for my Suntour Superbe Pro hub. My left rear race has been damaged by a defective ball bearing irregularly wearing it down over time. I've been soliciting various online suppliers, but have come up empty handed thus far.
Forgive me if soliciting of this sort is not permitted on this forum, I'm getting desperate. Any help would be appreciated.
If the bearing was bad enough to screw up the cone, are you sure the cup is still good?
Sorry, though, I don't know of any place to get a cone. You might have to pick up a whole hub and rob the axle and cones out of it provided your cup is ok. At least you'd then have a spare cone...
I'm professional Keirin rider in Japan
Suntour considerably went bankrupt ahead.
Therefore, hub of superbe is valuable in Japan.
However, hub of superbe has a lot of fans in high performance in
Keirin rider of Japan still looks for hub of superbe.
Hub of superbe has several models.
Is hub of superbe that you are using this?
Your question might possibly be answered to me.
And,please look at my website
hey Tomity check your pms. i have extra superB rear hub. spaced at 122 but i need a hub spaced at 112
as far as the cone. i really dont have extra. just hte one that is on my hub. sorry
The shaft of Superbe hub can be exchanged from 120 to 110mm.
It exchanges the shaft and cone of Superbe hub for 110mm.
However, it is necessary to look for because the Suntour Co. went bankrupt.
As for that of Shimano Dura-Ace and Superbe, the standard is different.
It is not possible to share.
|All times are GMT -6. The time now is 01:37 AM.|