Campag lockrings - standard thread?
#1
The Crank
Thread Starter
Campag lockrings - standard thread?
Do Campag hubs have the standard thread for lockrings?
I bought second-hand Campag wheels recently and I can't get the lockring on
I bought second-hand Campag wheels recently and I can't get the lockring on
#2
Elitist
Join Date: Jul 2005
Location: Atlanta, GA
Posts: 15,965
Mentioned: 88 Post(s)
Tagged: 0 Thread(s)
Quoted: 1386 Post(s)
Liked 92 Times
in
77 Posts
No, they have a different thread pitch. Whatever you do, don't force it. You may mess up the threads.
Look into getting any of the ones listed as "Campagnolo compatible" here: https://www.benscycle.net/index.php?m...&cPath=188_231
Look into getting any of the ones listed as "Campagnolo compatible" here: https://www.benscycle.net/index.php?m...&cPath=188_231
#3
Junior Member
Join Date: Aug 2010
Posts: 16
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
If you don't want to buy/can't find a campy lockring, euro asia makes one in campy threading that is good and inexpensive.
Campagnolo threading standard is 33.5mm x 24 TPI, Most others (shimano etc..) are 1.29" x 24 TPI.
Cog threading is the same across the board
I'm going to assume that you already know the lockring is reverse threaded
Campagnolo threading standard is 33.5mm x 24 TPI, Most others (shimano etc..) are 1.29" x 24 TPI.
Cog threading is the same across the board
I'm going to assume that you already know the lockring is reverse threaded