What is the best winter glove solution out there???
#1
Junior Member
Thread Starter
Join Date: Jul 2008
Location: Fair Lawn, New Jersey
Posts: 8
Bikes: 2006 Mercier Galaxy AL
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
What is the best winter glove solution out there???
Hello,
i have purchased to pair of winter gloves so far (Seirus and Chiba) and both are not enough for those cold morning rides. My fingers would really appreciate some feedback.
thanks.
i have purchased to pair of winter gloves so far (Seirus and Chiba) and both are not enough for those cold morning rides. My fingers would really appreciate some feedback.
thanks.
#2
Senior Member
Join Date: Jun 2007
Location: ChapelBorro NC
Posts: 4,126
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 98 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Ski gloves. Spend the money, your hand will thank you for it.
The pair I use is from LLBean. I got them ~10 years ago, and with the leather palm they are holding up nicely.
The pair I use is from LLBean. I got them ~10 years ago, and with the leather palm they are holding up nicely.
#3
Junior Member
Thread Starter
Join Date: Jul 2008
Location: Fair Lawn, New Jersey
Posts: 8
Bikes: 2006 Mercier Galaxy AL
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks.
can you tell me the maker and model ? Aren't they too bulky for control or just fine?
can you tell me the maker and model ? Aren't they too bulky for control or just fine?
#4
aka Phil Jungels
Ice fisherman gloves. Closed cell neoprene. Available at most sporting goods stores, or via Hodgeman's website. I get the full finger ones, not the foldable fingertip ones. I also use them for raingloves on the motorcycle, and they double as cold ride gloves if the electrics aren't available.
#5
Member
Join Date: Jun 2006
Location: Calgary
Posts: 43
Bikes: Kona Dew
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Mittens. I have no problem working my shifters or brakes with them.
These are the ones I use:
https://www.mec.ca/Products/product_d...45524442617623
These are the ones I use:
https://www.mec.ca/Products/product_d...45524442617623
#7
Senior Member
Join Date: Jul 2008
Posts: 825
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 3 Times
in
1 Post
i was thinking about using regular bike gloves and medical plastic gloves over those. i hate soaking wet gloves, moreso on the ride back home. i have a pair of ski glvoes but they are so bulky with STI shifters.
i havn't found a decent waterproof glove thats mobile enough for the hands and that won't leave my hands driping in sweet.
i havn't found a decent waterproof glove thats mobile enough for the hands and that won't leave my hands driping in sweet.
#8
Senior Member
Join Date: Jun 2007
Location: A Coffin Called Earth. or Toronto, ON
Posts: 12,257
Bikes: Bianchi, Miyata, Dahon, Rossin
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 5 Times
in
5 Posts
i was thinking about using regular bike gloves and medical plastic gloves over those. i hate soaking wet gloves, moreso on the ride back home. i have a pair of ski glvoes but they are so bulky with STI shifters.
i havn't found a decent waterproof glove thats mobile enough for the hands and that won't leave my hands driping in sweet.
i havn't found a decent waterproof glove thats mobile enough for the hands and that won't leave my hands driping in sweet.
invest in 2 pairs of gloves. stick the second pair in a bag or pannier.
__________________
Food for thought: if you aren't dead by 2050, you and your entire family will be within a few years from starvation. Now that is a cruel gift to leave for your offspring. ;)
https://sanfrancisco.ibtimes.com/arti...ger-photos.htm
Food for thought: if you aren't dead by 2050, you and your entire family will be within a few years from starvation. Now that is a cruel gift to leave for your offspring. ;)
https://sanfrancisco.ibtimes.com/arti...ger-photos.htm
#9
smatte
Join Date: Aug 2008
Location: Central Ma
Posts: 166
Bikes: diamondback - sherwood
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I have ski gloves with removable liners. I removed the liners and wear my riding gloves inside. Below 30F this morning, hands stayed pretty warm.
Still trying to figure out how to keep my toes warm. They were numb when I got to work.
Still trying to figure out how to keep my toes warm. They were numb when I got to work.
#10
Senior Member
Join Date: Jun 2008
Posts: 152
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I really like convertible gloves/mittens like this:
https://www.amazon.com/Convertible-Gl...4877020&sr=1-5
I open and close them periodically on my ride as my fingers get too warm or too cold. I haven't found a waterproof pair yet though. They always seem to be some sort of a knit material. I'm still shopping for something to use in the wet this winter.
https://www.amazon.com/Convertible-Gl...4877020&sr=1-5
I open and close them periodically on my ride as my fingers get too warm or too cold. I haven't found a waterproof pair yet though. They always seem to be some sort of a knit material. I'm still shopping for something to use in the wet this winter.
#11
Senior Member
Join Date: May 2007
Posts: 90
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Upright Joe: I haven't tried these, but they might be what you want:
https://www.amazon.com/Man*****-Casca...ref=pd_sbs_a_2
https://www.amazon.com/Man*****-Casca...ref=pd_sbs_a_2
#13
Senior Member
Join Date: Sep 2008
Location: Beautiful Long Beach California
Posts: 3,589
Bikes: Eddy Merckx San Remo 76, Eddy Merckx San Remo 76 - Black Silver and Red, Eddy Merckx Sallanches 64 (2); Eddy Merckx MXL;
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 143 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
#14
Junior Member
Join Date: May 2008
Posts: 6
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Try some ice climbing gloves. I use these: https://www.rei.com/product/769515
#15
Senior Member
Join Date: Aug 2007
Location: central ohio
Posts: 1,536
Bikes: 96 gary fisher 'utopia' : 99 Softride 'Norwester'(for sale), 1972 Raleigh Twenty. Surly 1x1 converted to 1x8, 96 Turner Burner
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 4 Times
in
4 Posts
Another vote for Mittens. I picked up a pair of Man***** Snowboard Mittens w/glove liner for $20 (retail for $35 or $70, whichever you believe). Anyway, they worked down to 5f.
#16
Senior Member
Join Date: Dec 2005
Posts: 1,655
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Double wrap of thick foam bar tape for extra insulation.
Cool temps 45-55F: Full finger cycling gloves:
35-45F: Full finger cycling gloves in a nylon outer shell (robbed from cheap Wal-mart gloves).
15-35F: Warm ski gloves, crab claw gloves, or fingerless cycling gloves under large ski glove.
below 15F: Pogies combined with full finger cycling gloves or warmer if in extreme cold.
Some issues that you may have to deal with:
If you ride hard, fast and/or a long distance on a daily basis you will sweat quite a bit even in your gloves. This is the primary problem with ski gloves that don't have a removable lining and why the two layered glove system works better. You can pull the gloves apart and they will dry out for the next days use. Typical ski gloves will not do this because most don't have a removable liner. They take 2-3 days or longer to dry out and the cheap Walmart type of ski gloves have a low cost "water proof" liner that keeps the glove from breathing enough to be used on a bike and they take even longer to dry out than good ski gloves. The best approach I have found is a thin breathable nylon shell over a polyester fleece glove liner or a cycling glove. They both breath well and dry out well when seperated.
Last edited by Hezz; 10-24-08 at 08:59 PM.
#17
Senior Member
Join Date: Oct 2004
Location: Philadelphia, PA
Posts: 108
Bikes: Cannondale R400
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Best biking mittens are the Lake Cycling MX Firepalm. they have a zipper insert for charcoal activated hand warmers....I've used mine for the past 5 years and they AWESOME!
#18
It's carbon dontcha know.
I'm a big fan of my Pearl Izumi Lobster's:
https://www.pearlizumi.com/product.ph...duct_id=527528
https://www.pearlizumi.com/product.ph...duct_id=527528
#19
Yup
Join Date: Jan 2004
Location: where the sunbeams end and the starlight begins
Posts: 3,083
Bikes: Kona Unit, planet X cx bike, khs fixed gear
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 6 Times
in
5 Posts
I like my MEC lobster gloves. I tried some by Swix and while very comfy, they were lined inside like gloves keeping my fingers seperate and I couldn't wear thin liner gloves with them nor are they very widproof. The MEC ones allow for a thin liner glove underneath for extra warmth, are more windproof and I like being able to dry the gloves b/t the ride to/from work.
For cooler days I have windprrof/waterproof gloves that are very comfy and can take a liner underneath for colder days. I used just the shell gloves the other day for my 50 minute commute at 3C with no problems. Windproof is the key IMO.
I tried mittens but they are too bulky in the palm for me and after 10-15 minutes my hands hurt.
For cooler days I have windprrof/waterproof gloves that are very comfy and can take a liner underneath for colder days. I used just the shell gloves the other day for my 50 minute commute at 3C with no problems. Windproof is the key IMO.
I tried mittens but they are too bulky in the palm for me and after 10-15 minutes my hands hurt.
__________________
When sadness fills my days
It's time to turn away
And then tomorrow's dreams
Become reality to me
When sadness fills my days
It's time to turn away
And then tomorrow's dreams
Become reality to me
#20
Pint-Sized Gnar Shredder
Join Date: Nov 2007
Location: Somewhere between heaven and hell
Posts: 3,549
Bikes: '09 Jamis Komodo, '09 Mirraco Blend One, '08 Cervelo P2C, '08 Specialized Ruby Elite, '07 Yeti AS-R SL, '07 DMR Drone
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
So that works alright? I just bought a nice pair of Gore-Tex gloves for snowboarding, and if they can do double duty, I'd be thrilled. Last year I rocked an oversize pair of cheap cotton gloves on top of my full finger mountain bike gloves, and that sucked.
#21
cyclepath
Join Date: Sep 2005
Location: "The Last Best Place"
Posts: 3,550
Bikes: 2005 Trek Pilot 5.0, 2001 Specialized Sirrus Pro, Kona Lava Dome, Raleigh hardtail converted to commuter, 87 Takara steel road bike, 2008 Trek Soho
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I really like convertible gloves/mittens like this:
https://www.amazon.com/Convertible-Gl...4877020&sr=1-5
I open and close them periodically on my ride as my fingers get too warm or too cold. I haven't found a waterproof pair yet though. They always seem to be some sort of a knit material. I'm still shopping for something to use in the wet this winter.
https://www.amazon.com/Convertible-Gl...4877020&sr=1-5
I open and close them periodically on my ride as my fingers get too warm or too cold. I haven't found a waterproof pair yet though. They always seem to be some sort of a knit material. I'm still shopping for something to use in the wet this winter.
I've always wondered about the 3SP gloves from Sporthill. The pants of that fabric are fantastic. Anybody here ever seen them?
__________________
--------------------------------------------------------------------------------------------
"Without music, life would be a mistake."
-- Friedrich Nietzsche
--------------------------------------------------------------------------------------------
"Without music, life would be a mistake."
-- Friedrich Nietzsche
#22
Goldmember
Join Date: Aug 2008
Location: Portland, OR
Posts: 113
Bikes: Trek Multitrack 750, Dahon Classic
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I just picked up a pair of hunting gloves that have a soft polyester waterproof shell (camo) and plenty of insulation. I can't testify to their low-temp performance, but I held them under the faucet for a minute or so, and they are definitely waterproof and breathable.
Brand: Hot Shot Price: $14
I may get some merino wool liners, but I live in a mostly wet and mild area.
Brand: Hot Shot Price: $14
I may get some merino wool liners, but I live in a mostly wet and mild area.
#23
Senior Member
Join Date: Sep 2008
Location: GTA
Posts: 764
Bikes: Dahon Mu SL 08 / Matrix 08
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
i'm still testing several ones out.
currently using a pair of IQ that is 99% waterproof, however cold wise, it is okay....
That aside, i got another pair from costco, that is a normal winter glove but very well designed and good for biking, also waterproof
... well i only buy waterproof gloves, some winter gloves are not waterproof like those convertible mittens, they are good, but sucks when wet, which is very likely to happen here in my city.
the most horrible thing riding on winter snow, is having to go across sea of melted sludge snow mixture, and your random spots of black ice.
anyways, if both of those gloves fails, then i'll just switch to some hard core skiing gloves, but i've always worried they might be too hard to manipulate the shifter / breaks levels.
currently using a pair of IQ that is 99% waterproof, however cold wise, it is okay....
That aside, i got another pair from costco, that is a normal winter glove but very well designed and good for biking, also waterproof
... well i only buy waterproof gloves, some winter gloves are not waterproof like those convertible mittens, they are good, but sucks when wet, which is very likely to happen here in my city.
the most horrible thing riding on winter snow, is having to go across sea of melted sludge snow mixture, and your random spots of black ice.
anyways, if both of those gloves fails, then i'll just switch to some hard core skiing gloves, but i've always worried they might be too hard to manipulate the shifter / breaks levels.
#24
surly old man
Join Date: Sep 2006
Location: Carlisle, PA
Posts: 3,392
Bikes: IRO Mark V, Karate Monkey half fat, Trek 620 IGH, Cannondale 26/24 MTB, Amp Research B3, and more.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 46 Post(s)
Likes: 0
Liked 42 Times
in
18 Posts
I got some lobster-claw glloves (thumb and index are separate, other fingers are in one "mitten") from the Army-Navy store. I think they are made for shooting in the extreme cold. (Be warned Sweden, you are on notice!!) Tough outer shell and removable wool lining. They only cost me a few dollars. On the very coldest of days, they are not enough, but in all other weather they are excellent. Plus, now I can shoot from my bike all year round.
jim
jim
__________________
Cross Check Nexus7, IRO Mark V, Trek 620 Nexus7, Karate Monkey half fat, IRO Model 19 fixed, Amp Research B3, Surly 1x1 half fat fixed, and more...
--------------------------
SB forever
Cross Check Nexus7, IRO Mark V, Trek 620 Nexus7, Karate Monkey half fat, IRO Model 19 fixed, Amp Research B3, Surly 1x1 half fat fixed, and more...
--------------------------
SB forever