View Single Post
Old 11-19-16, 07:49 PM
  #5  
Andrew R Stewart 
Senior Member
 
Andrew R Stewart's Avatar
 
Join Date: Feb 2012
Location: Rochester, NY
Posts: 15,169

Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Raleigh Pro, Trek Cycle Cross, Mongoose tomac ATB, GT Bravado ATB, JCP Folder

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3011 Post(s)
Liked 1,336 Times in 934 Posts
First thing I thought of was a ring scuffing the ft der cage bottom edge. I will say that these press in bearing BB's do have a lot of noises. From bearing OD fit within the shell, from spindle fit in the bearing ID, from the various spacers and things on the spindle. We've even seen a loose spindle fit in the RH arm. Although if it weren't for the beginning of the vid where no one's on the bike I might guess a saddle source. Andy.
Andrew R Stewart is offline