Mavic cxp22
- rear, if there's a difference for just buying rims
- two
- 36 spoke
- double rimmed
- silver if possible I guess, black wouldn't be horrible.
Shimano CS-HG50 Sora 8 Speed Cassette - 11-32t (11-13-15-18-21-24-28-32)
https://www.universalcycles.com/shop...s.php?id=12017
$18
Item #: 12017-181727
Hub?
Someone mentions.... "Typically there are rear hubs with 130 (road) and 135 mm (mountain) spacing. You need to figure out what the spacing of the frame is and chose a hub."
Spokes I can figure out later, but double butted.
This is what I got before (probably the wrong side since these are for the 32-spoke/5mm too narrow hub)
https://www.universalcycles.com/shop...s.php?id=16560
Item #: 16560-37964
Description: DT Competition Spokes - 2.0 x 292 mm (Silver)
tem #: 16560-37962
Description: DT Competition Spokes - 2.0 x 290 mm (Silver)
And the nipples...
Item #: 16569-38183
Description: DT Swiss Brass Nipples - 2.0 x 12mm Silver Brass
I already bought an extra bottle of nipple lube/lock for that project.
I suppose I could walk more or actually drive my car and that would extend the time I have on the 32-spoke blown out rim before it fails.
General bike specs...
Raliegh Detour 4.5, wheel size 700c, frame size 23--, 24 speed
2009 Raleigh Detour 4.5 - BikePedia
Hubs Front: Joytech Alloy QR, Rear: Shimano RM30
Kicking myself for throwing out that hub.... The original rear wheel was 36-spoke. Oh well. It's $20-25 for a hub, and it's new.
So this must be the hub they don't make anymore. I researched previously.
Shimano RM30
https://www.amazon.com/Shimano-FH-RM...ct_top?ie=UTF8
Shimano FH-RM30 Rear Hub - 8-Speed, 36H x 135mm, Quick Release, Silver
8/9-speed Cassette
36-hole
Alloy
Bingo.... 135mm hub. I bet my 32-spoke hub is 130mm. Info matches the other poster. I must have a 130mm mountain bike hub.
So I'm looking for a 135mm hub, 8/9 speed....
And it would take my current cassette.... Shimano CS-HG50 Sora 8 Speed Cassette - 11-32t (11-13-15-18-21-24-28-32)
Rear hub too if that matters... If it takes a cassette, it would obvious it's rear hub I guess.
I'd be reusing my current skewers.
Freehub, freewheel, free-whatever... That part I'm not sure what it means. I just need to get this to match.
Hubwise, it should match the hub tool I already bought too ideally....
Here's the rear hub tool I bought before. This fits my current 32-spoke rear wheel hub/cassette. I had to get this in order to remove the cassette to get at the spokes.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Park Tool Cassette/Rotor Lockring Removal Tool - FR-5/FR-5G
no pin
"Fits Shimano®, SRAM®, SunRace®, SunTour®, Chris King® and other cassette lockrings."
This is $7.25 though. If I get two new hubs for two new 36-spoke rear wheels, if I have to buy a new hub tool and they're under $10, fine. That's not a big deal. The FR-5 one I've got now will have served it's purpose.
??? Is this lockring removal tool just for the cassette? Or does it relate to the hub too? ie I could have "any" hub, but it's the cassette that determine the lockring tool?
I've got a Shimano cassette now...
The original hub was Shimano....
So I'm probably looking for a Shimano hub.
A shimano hub?
135mm, for road bikes
rear
8/9 speed
36-hole
Very similar to the Shimano FH-RM30 that they don't make anymore. Unless I can actually find a Shimano FH-RM30, and two of those.
I wonder why they stopped making them. They would have replaced it with something... exactly the same?
On to look for Shimano hubs...
SHIMANO ? Cycling, Fishing, Rowing
Site's fudge up.... Got a bad certificate warning. Said to continue anyway. Takes me to Amazon instead. That's under bicycles, US from shimano.com
I'd also want to watch for bike parts on Amazon being shipping out of Japan or China. I got burned on that before with small parts taking forever to arrive or getting lost in shipping. Didn't matter since it was a reflector though.
Maybe universal?
https://www.universalcycles.com/shop...p?category=730
Road bike hubs, rear...
Phew... pricey.
Found the Shimano ones...
Shimano 135mm Rear Hubs
There's a disc hub. I don't know what that is, but I'd guess it's for disc brakes...
Is this my new hub?
https://www.universalcycles.com/shop...0&category=573
Shimano FH-F700 Capreo Rear Hub
Maybe not... "Requires the use of the Shimano CS-HG70 Capreo Cassette"
No it's 32 holes.
Not much selection there unless I'm searching the wrong way.
I would have thought a hub is pretty generic. Maybe 2-3 different standard models for hubs, made by different manufacturers.
Maybe Amazon?
"shimano rear hub 36h 135mm"
More here....
"Freehub" is what I don't know. Not sure what it means exactly.
I could measure my bike forks on back....
And if I orderd the hubs, I could pop my current cassette off and check that it actually fits...
This might match..
https://www.amazon.com/Shimano-XT-T7...+hub+36h+135mm
Shimano XT T780 Rear Hub - 8/10-Speed, 36H, QR, Black
$66.91
black
Ouch on the price though. I thought they'd be cheaper since it's one part. I think the whole wheel when I got the 32-spoke one was around $90 pre-built.
https://www.amazon.com/Shimano-T610-...+hub+36h+135mm
Shimano T610 Hub Rr Shi Fh-t610 Deore 36 8-10scas Sl Bulk
not much info though
$44
I found a couple like this.
https://www.amazon.com/Shimano-XT-M7...+hub+36h+135mm
but they say Shimano 9/10/SRAMF/R so I'm thinking it's wrong since I want an 8 speed cassette.
Otherwise, this one doesn't look bad. It's $55.
Random google search.... "shimano rear hub 135mm 36 hole"
https://www.bike-discount.de/en/buy/...Fc66wAodaakBLw
Shimano
LX Rear Hub FH-T670 36h black
which brings me back to this one again.
https://www.amazon.com/Shimano-T670-...ywords=FH-T670
Shimano T670 Hub Rr Shi Fh-t670 Dlx 36 8-10scas Sl Bulk
$40
Why would Shimano stop making the original hub I had?
And why keep making parts, changing them, etc...? I see parts available from non-manufacturer sites that must be the older, discontinued parts if they're not on the manufacturer's site anymore.
Now Shimano's site works...
https://bike.shimano.com
https://bike.shimano.com/content/sac...rear-hubs.html
Just one option?
https://bike.shimano.com/content/sac...fh-2400-s.html
Claris Rear Freehub (8/9-speed)
Can't quite tell from the specs...
PRODUCT SPECS
Model Number FH-2400
Series Claris
Axle Type QR
Over Locknut 130mm
Axle Length 141mm
Spoke Holes 32/36H
Contact Sealing Yes
Back to Amazon "shimano FH-2400 36h 135mm"
Maybe I found it... Is this my new hub?
Black...
https://www.amazon.com/Shimano-2400-...2400+36h+135mm
Shimano 2400 Hub Rr Shi Fh-2400 Claris 36h 8-10scas Bk Bulk
$22
- black
Or silver...
https://www.amazon.com/Shimano-2400-...2400+36h+135mm
Shimano 2400 Hub Rr Shi Fh-2400 Claris 36h 8-10scas Sl Bulk
$22
- silver
So what's the difference between this Claris line (more current?) and the Deore ones (more expensive)?
I'm getting burned out for searching. I've got more info than before though. It's more effort to track down a hub than I thought.