Old 03-20-17, 10:11 AM
  #4  
maartendc
Senior Member
 
maartendc's Avatar
 
Join Date: May 2015
Posts: 823

Bikes: 1989 Cannondale 3.0, 2001 Trek 5200, 2010 BMC SLC01, Minerva MTB Hardtail

Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 486 Post(s)
Liked 10 Times in 10 Posts
Originally Posted by Barabaika View Post
You must measure the width of the shell where a bottom bracket screws in.

The bottom bracket in your link is 68mm. It's a standard width.
Originally Posted by bradtx View Post
It is English threaded so this should be an easy swap.

Brad
Thanks guys. Yes, I know I need to make sure its either English or Italian.

I was mainly wondering about the bottom bracket Length though (meaning the distance between the left and right crankarms).

When you look at a square taper bottom bracket you can buy, they give you many different lengths, ranging from 107mm to 127mm:
Shimano UN55 Bottom Bracket > Components > Drivetrain > Threaded | Jenson USA

Does this not apply to the Hollowtech II bottom brackets? Why does it only come in 1 length?? Will it fit, no matter what the length of my Square taper is? (Which is 113mm according to the Velobase article).

Thanks!
maartendc is offline