View Single Post
Old 02-15-19, 10:27 AM
Andrew R Stewart 
Senior Member
Andrew R Stewart's Avatar
Join Date: Feb 2012
Location: Rochester, NY
Posts: 11,456

Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Raleigh Pro, Trek Cycle Cross, Mongoose tomac ATB, GT Bravado ATB, JCP Folder

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1677 Post(s)
Likes: 0
Liked 8 Times in 7 Posts
For Sale- Good OA torch for building

Itís time to let a friend move on. Iíve had this Goss 42W torch and tips since I first began building. It was vastly smaller and lighter then the usual welding stuff you see used back then. Not quite ďaircraftĒ but far easier to hold for the long periods a newbie needed to get ok at brazing.Specs- 386gm with the medium tip. B size hoes fittings, #1, 3. 5 tips (.025Ē, .042Ē and ,060Ē orifices. I find the .042 works for 80+% of my needs).Condition- Itís used. The chrome handle has knocks and such but is mostly still shinny, with only a bit worn down to the brass and has no corrosion. The valves were serviced/replaced 20ish years ago (Iíll include the OEM ones) and turn
smoothly. The O valve is a bit sensitive to adjust but stays put once done. Tips have the usual darkened look of used ones, I did shine the portion that has the sizes listed a couple of years ago.Cost- $45 plus $14.35 of USPS flat rate box shipping (within the 48 states) for a total of $59.35. I take PayPal or checks if asked nicely[img][/img] While this isnít a J28, a AW!A or a Meco Midget it is about 30% as costly and has the tip sizes that are perfect for OA brazing of bike stuff.First reply gets three days to finalize before I reoffer to reply two and on down the line. Shipping can be as soon as next Tuesday. Andy
Andrew R Stewart is offline