View Single Post
Old 12-28-19, 07:31 PM
  #19  
Andrew R Stewart 
Senior Member
 
Andrew R Stewart's Avatar
 
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,003

Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4172 Post(s)
Liked 3,793 Times in 2,272 Posts
Using two bolts, one for the shell (the top one with a machined cap/washer on the top of the shell) and the other to secure the post to the table, just seemed easy to do. The shell tightens down really well on the post top. I see no need for an inside the shell sleeve as some designs have. Threaded shaft/stud sticking up or a bolt doesn't seem to me to be that different.

I agree that most posts don't have the mass and diameter that mine has. Possible overkill. Andy
__________________
AndrewRStewart
Andrew R Stewart is offline