View Single Post
Old 06-08-21, 08:07 AM
  #6  
tcs
Palmer
 
tcs's Avatar
 
Join Date: Mar 2007
Location: Parts Unknown
Posts: 6,600

Bikes: 1980 Mike Melton, 1982 Stumpjumper, 1982 Santana, 1984 Alex Moulton AM, 2008 BikeFriday tikit T-♾, 2010 Dawes Briercliffe, 2017 Dahon Curl i8, 2019 Surly ˝DT14, 2021 Motobecane Turino 1x12

Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
Quoted: 846 Post(s)
Liked 379 Times in 245 Posts
Originally Posted by Andrew R Stewart View Post
Having a specific SA hub model would help. Does the hub also include a coaster brake, a light generator, a drum brake?
If it's on a tricycle as the OP says, built May 1994, then it's most likely an AWC with a transfer sprocket screwed onto the RH flange.

Schematic:
http://www.sturmey-archerheritage.co.../pic-156.1.jpg




First step: unscrew the RH cone, pull the driver assembly and check on the health of the actuator plate.

Have you tried to add oil to the hub? Is the oil hole still in the hub shell?


Sturmey of course went to NGLI #00 grease lubrication in 1984 and discontinued the oil port at that time. Unlikely then that this 1994 hub has an oil port.

Last edited by tcs; 06-08-21 at 08:14 AM.
tcs is offline