Messed up a read hub rebuild - which nuts where??
Hello,
I have a Giant Chicago MTB. It's old but it works. I decided to disassemble the hub on the rear wheel to see if I could re-grease it (it was grinding a bit).
Managed to re-pack the bearings with grease, and had re-installed the wheel on the bike after some re-assembly. Feeling pleased with myself and then I noticed I had a large washer and nut left over .....
Should have taken some pictures before I started but didn't. Pictures of the rear hub with all nuts and washers on it below. Can anyone tell me if this assembly is correct?
Cannot get the largest sprocket on the rear cassette now, so something is out. Looks like I have too many nuts on the inside of the stay, cassette side, but where does that nut go then?
Giant don't seem to offer an exploded diagram of parts for this bike.
images2.imgbox.com/b5/cc/FcfXbInF_o.jpg
images2.imgbox.com/34/41/pha6jZL6_o.jpg
images2.imgbox.com/c5/6e/IvGIkeq5_o.jpg
images2.imgbox.com/e6/a1/KeTJvxeM_o.jpg
Thanks.