tgot , make sure your cranks are a match for the taper on the spindle . There are two main sizes that are used commonly , JIS or Japanese Standard , and ISO for the European cranks like Campy. The ISO spindle is .0015" per side smaller than the JIS spindle. The taper is the same but the crank seats differently from one to the other. In other words , if you try to put , say , a Campagnolo crank on a JIS spindle , it will sit further out from the BB shell. While you are at it , check to make sure that the cartridge is designed for the BB shell you have . To me it looks like the Cartridge is too wide for the BB shell.
Last edited by Kabuki12; 08-16-22 at 08:43 AM.