Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,073
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4201 Post(s)
Wheels from a factory being 5-10mm out of dish is a HUGE amount of poor assembly. This much makes me wonder about how this was measured as it's close to what a disk hub's flanges might be off set from the fork's centerline (as in where the hub axle's end caps/lock nuts touch). So is this 5-10mm based on the axle ends or the flanges?
Agree that it's too bad the OEM steel fork has shipped as it would likely have been alignable in all planes. I am no longer doing LBS hours but am always willing to consider interesting jobs. Andy
__________________
AndrewRStewart