View Single Post
Old 08-05-07, 11:49 PM
  #1  
rxrjoe
Newbie
 
Join Date: Aug 2007
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
help with hub/wheel please!

Hi everyone!

(warning: long explanation ahead, may not be necessary. Read question on 3rd paragraph first)
I recently bought a really cheap BMX bike from the local Target. It has a problem with it. It wouldn’t ride right. I took apart the rear wheel and took apart the hub (I think that’s what its called. It has the bearings in it.). I attached 2 pictures showing the parts. A and B are 2 different views of the base. On B, where I outlined a part in red, there are grooves so that part H can fit in there. Part H is fit in with Part I, which is broken. Part C goes on part A (and B). Ball bearings, 2 pairs of 48, go on the top grooved-in part of C and the bottom grooved-in part, just below and above the jagged inner part of C (btw, I believe H is a braking mechanism and it works in the jagged part of C.) E and F (btw, it says FALCON 6HO on it) are top and bottom views of the final part that fits on top of parts A (and B) and C. I’m not sure where D goes but I can figure it out easily.

So basically my question is, what is the name of part I and where can I get one? (Part I is about 4.2 cm diameter and I believe the wheel is 20 inches). Also, I need about 4 extra ball bearings that I lost. Anyone know where I can get those?

Thank you for all of your help!

http://i108.photobucket.com/albums/n...0/overview.jpg

http://i108.photobucket.com/albums/n.../overview2.jpg

Those are 2 differnet images. Chek em both out

P.S. Heres a pic of my magna bike:
http://i108.photobucket.com/albums/n30/ilay90/bike.jpg
rxrjoe is offline