View Single Post
Old 05-01-08, 01:54 PM
  #2  
Peter Jon White
Junior Member
 
Join Date: Feb 2007
Location: New Hampshire
Posts: 9
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by fthomas
Purchased the SRAM i-Light 36H and want to build a wheel up using a Mavic A719 rim with Wheelsmith DB14 spokes. This will be my first time building a wheel and I have a lot to learn, which is the reason I am taking it on myself. I have popped a few spokes on my rear wheel and will be using the existing hub and building it up with a A719 as well.

After downloading a spoke calculator I am at a loss as to what the real spec's on the i-Light are in order to plug into the calculator. Sram lists the following

Hole Reference 80mm
Flange Distance 40mm
Offset 0
Axel Length 103mm

Does this fit into these variables in the spread sheet?

Diameter of the spoke holes 80mm
Distance from Center of the wheel to center of the flange 40mm
That's correct. Be sure to use cross three for the pattern.
Peter Jon White is offline