View Single Post
Old 10-29-04, 06:31 PM
  #12  
madhouse
Senior Member
 
madhouse's Avatar
 
Join Date: Sep 2004
Location: Podunc, Minnesota
Posts: 416

Bikes: '14 Bacchetta Corsa, '93 Ryan Vanguard, Action Bent SWB USS

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I just mounted the same fenders on my Royale. The front fender I cut off even with the mounting clip because I didn't have enough clearance for the front tire. I ended up tapping threads in the fork at the head because the bolt they sent wasn’t long enough to reach all the way through the crown of the fork and I didn’t have anything in my shop that would work. I intend on pop riveting a bracket on the remaining portion to extend the fender out the front.

On the rear fender I need to Dremel out the side of the fenders where they pass through the seat stays to gain a little more clearance.

These fenders seemed very cross functional… if you have the tools and hardware to make it work for your situation. They could have put more clips, bolts, etc. in the kit. If structural weakness is a problem zip-ties can do wonders!
madhouse is offline