I can't take pictures because my memory card got corrupted.
Here's the tool I used:
http://www.irwin.com/irwin/consumer/...6&search=false
This is the best I can do for a picture of the fender until I can get a new card. I measured the distance between the stays at the point where I wanted the fender to sit and marked the fender with a sharpie. I used the tool to flatten the fender to either side of the marks and then bend it to the angle of the stays. I did this to the bottom 3/4" of the fender. A stainless screw and Nylok nut through the chainstay bridge wedge the fender between the stays so it won't rattle.