Lawn mowing for bike commuters (only slightly OT)
#1
Senior Member
Thread Starter
Join Date: Sep 2004
Location: Arlington, VA
Posts: 158
Bikes: Jamis Aurora Elite (2011); Trek 520 (2006); Specialized Globe (2005); Lemond Zurich (2003)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Lawn mowing for bike commuters (only slightly OT)
Why did I spend so long loving bike commuting but hating pushing a gas (later, electric) lawn mower on weekends? The solution was there all along: the push-reel mower, the "old-fashioned" human-powered lawn mower that, like the bike, is in many ways superior to its engine-powered cousin.
Now that I no longer have to spend time trying to start a gas engine or lay extension cord, I mow my lawns much, much faster. The physical effort required to push the mower is actually less than for my old, heavy electric mower, because the reel mower is so light.
I'm realizing that most of the arguments in favor of bike commuting apply here:
Have a short commute/small lawn? Don't like buying gas (or kilowatts)? Don't want a big heavy thing taking up space in your garage? Interested in paying half as much for a human-powered vehicle? Here you go: https://www.target.com/inch-Scotts-Cl.../dp/B00004RA3E
Now that I no longer have to spend time trying to start a gas engine or lay extension cord, I mow my lawns much, much faster. The physical effort required to push the mower is actually less than for my old, heavy electric mower, because the reel mower is so light.
I'm realizing that most of the arguments in favor of bike commuting apply here:
Have a short commute/small lawn? Don't like buying gas (or kilowatts)? Don't want a big heavy thing taking up space in your garage? Interested in paying half as much for a human-powered vehicle? Here you go: https://www.target.com/inch-Scotts-Cl.../dp/B00004RA3E
#3
♋ ☮♂ ☭ ☯
Join Date: Feb 2005
Location: 40205 'ViLLeBiLLie
Posts: 7,902
Bikes: Sngl Spd's, 70's- 80's vintage, D-tube Folder
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
When I lived in Vermont I used an old flea market reel mower.
People would drive by and give my thumbs up, too
I did it mostly because of noise, though. There were churches and
neighbors close by that always had stuff going on, and it seemed anti-social
to blare a gas mower when it wasnt necessary
People would drive by and give my thumbs up, too
I did it mostly because of noise, though. There were churches and
neighbors close by that always had stuff going on, and it seemed anti-social
to blare a gas mower when it wasnt necessary
__________________
☞-ADVOCACY-☜ Radical VC = Car people on bikes. Just say "NO"
☞-ADVOCACY-☜ Radical VC = Car people on bikes. Just say "NO"
#6
Senior Member
Join Date: Nov 2007
Location: Boise, ID
Posts: 104
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
My reel mower cuts OK if I keep the blades sharp and adjusted. I prefer to mow early in the morning when it's just light enough to see. My neighbors wouldn't be too happy if I used a power mower.
#7
put our Heads Together
Join Date: Jun 2003
Location: southeast pennsylvania
Posts: 3,155
Bikes: a mountain bike with a cargo box on the back and aero bars on the front. an old well-worn dahon folding bike
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
My parents bought one and found out that there was no economical way to get its blades sharpened.
It was usable for about 5 years on a fairly normal sized front&back lawn. Recycling/replacing the human powered mower every 5 years isn't too bad if you compare it to the motorized alternatives. Overall it was a great mower up until the blade dulled toward the end of its lifespan.
It's possible the new mower they bought has blades that can be sharpened without mailing the mower across the country.
It was usable for about 5 years on a fairly normal sized front&back lawn. Recycling/replacing the human powered mower every 5 years isn't too bad if you compare it to the motorized alternatives. Overall it was a great mower up until the blade dulled toward the end of its lifespan.
It's possible the new mower they bought has blades that can be sharpened without mailing the mower across the country.
#8
Tortoise Wins by a Hare!
Join Date: Feb 2006
Location: Looney Tunes, IL
Posts: 7,398
Bikes: Wabi Special FG, Raleigh Roper, Nashbar AL-1, Miyata One Hundred, '70 Schwinn Lemonator and More!!
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 1549 Post(s)
Liked 941 Times
in
504 Posts
How high can the manual reel mowers be adjusted to cut? It's healthier for your lawn to keep the grass tall. My gas mower is set to 4-5 inches. I do use the bike to get the gas can refilled though.
I remember seeing pictures of a pedal powered reel mower someone made by attaching a bike to one. That's what I thought this thread was going to be about.
I remember seeing pictures of a pedal powered reel mower someone made by attaching a bike to one. That's what I thought this thread was going to be about.
#9
8speed DinoSORAs
Join Date: Jul 2002
Location: Oxford, UK or Mountain View, Ca
Posts: 2,749
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Reel is real!
OK, someone had to....
And I always use a reel mower. Quiet, easy to get around the garden, leaves a nice finish. The newer ones are not as good as the classic '60s cast iron model I have in the UK, but then I love old stuff.
Ed
OK, someone had to....
And I always use a reel mower. Quiet, easy to get around the garden, leaves a nice finish. The newer ones are not as good as the classic '60s cast iron model I have in the UK, but then I love old stuff.
Ed
__________________
Get a bicycle. You will certainly not regret it, if you live.
Get a bicycle. You will certainly not regret it, if you live.
#11
Senior Member
Join Date: Oct 2004
Location: Absecon, NJ
Posts: 2,947
Bikes: Puch Luzern, Puch Mistral SLE, Bianchi Pista, Motobecane Grand Touring, Austro-Daimler Ultima, Legnano, Raleigh MountainTour, Cannondale SM600
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
My parents bought one and found out that there was no economical way to get its blades sharpened.
It was usable for about 5 years on a fairly normal sized front&back lawn. Recycling/replacing the human powered mower every 5 years isn't too bad if you compare it to the motorized alternatives. Overall it was a great mower up until the blade dulled toward the end of its lifespan.
It's possible the new mower they bought has blades that can be sharpened without mailing the mower across the country.
It was usable for about 5 years on a fairly normal sized front&back lawn. Recycling/replacing the human powered mower every 5 years isn't too bad if you compare it to the motorized alternatives. Overall it was a great mower up until the blade dulled toward the end of its lifespan.
It's possible the new mower they bought has blades that can be sharpened without mailing the mower across the country.
Actually you can buy a sharpening kit that has a grinding compound and a handle that spins the blades in reverse, effectively putting a very sharp edge on the blades after about 5 minutes. I bought a kit for about $15 four years ago and sharpen the blades a couple times a year. I still have a lot of the compound left too. I'm sure if you google it, the kit's still easy to find. After sharpening, my reel mower cuts very nicely.
#12
Senior Member
Join Date: Feb 2009
Location: Atlanta, GA
Posts: 164
Bikes: 1996 GT Timberline (All Rigid), Aspect 45 (Hardtail), Schwinn Pro Stock 2,
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
You can probably find a forum on them somewhere. You can about guarantee there are some people out there who live, breath, and eat old reel mowers.
#13
Senior Member
Join Date: Feb 2009
Location: Orange County, CA
Posts: 1,173
Bikes: Fuji
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I used one as a teenager on a fairly small yard. It is a good workout and it was always easier to keep the grass shorter. After a year or two, the blade was dulled and dinged (stupid rocks ) since we were in a relatively new development at the time.
There was a spot in the backyard where the water drained when it rained, so the grass was always lusher there and a pain in the but with that. We switched to a gas mower the third year, and ran it to the ground. Literally.....I blew it up with STP injector cleaner (which was labeled as 'jet fuel') 8 years on one mower, I think we got our money's worth out of it.
When all the neighbor's moved in they all used electric mowers, until they cut the power cords. Then I made 10 bucks a lawn per week or two per house!
There was a spot in the backyard where the water drained when it rained, so the grass was always lusher there and a pain in the but with that. We switched to a gas mower the third year, and ran it to the ground. Literally.....I blew it up with STP injector cleaner (which was labeled as 'jet fuel') 8 years on one mower, I think we got our money's worth out of it.
When all the neighbor's moved in they all used electric mowers, until they cut the power cords. Then I made 10 bucks a lawn per week or two per house!
#15
Senior Member
Join Date: Jul 2003
Location: in bed with your mom
Posts: 13,696
Bikes: who cares?
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
actually the grass varieties available today have tougher stems and leaves and are designed for power mowers. If you really want to use a push reel mower, in addition to keeping it sharp, you need to plant the correct varieties of grass.
#16
Senior Member
Join Date: Apr 2005
Location: Down on East End Avenue.
Posts: 1,816
Bikes: Salsa Las Cruces, Burley R&R and a boat load of others.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Wow looks like there are lots to choose from.
https://www.peoplepoweredmachines.com...ll_compare.htm
https://www.peoplepoweredmachines.com...ll_compare.htm
#17
Senior Member
Join Date: Feb 2009
Location: Atlanta, GA
Posts: 164
Bikes: 1996 GT Timberline (All Rigid), Aspect 45 (Hardtail), Schwinn Pro Stock 2,
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Crap. That reminds me from 2004 when it was Kerry vs Bush for the Presidential Election. Then I think Dan Rather did that report where he had a report stating Bush was a bad person or whatever. Then suddenly all these typewriter experts came out and pointed out that typewriters of that time did not have superscript(?) or basically if you wrote 21st it didn't automatically get smaller except for a handful of typewriters that would be the equivilent of thousands of dollars now.
On a motorcycle forum there is a guy who is an expert on everything shaving related. It was freaking amazing what he knew about old razors.
People are strange but that makes life fun.
On a motorcycle forum there is a guy who is an expert on everything shaving related. It was freaking amazing what he knew about old razors.
People are strange but that makes life fun.
#18
Been Around Awhile
Join Date: Oct 2004
Location: Burlington Iowa
Posts: 29,973
Bikes: Vaterland and Ragazzi
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 12 Post(s)
Liked 1,536 Times
in
1,045 Posts
#19
Senior Member
Join Date: Mar 2008
Location: Costa Mesa CA
Posts: 2,636
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 11 Times
in
10 Posts
I have a tiny lawn, 'bout 20' x 30'. Someone left a Sear Craftsman push mower in the alley. Works good, and it's easy to store. My garage is crowded with bikes waiting to be revived & other cool alley finds. The Craftsman hangs nicely on the wall. Sears tools & equipment used to be the best quality & value around.
And I still have my grandfather's typewriter that he bought used while in high school. 85 years later, it still works fine. No computer or printer bought today will be fully functional in 2094.
And I still have my grandfather's typewriter that he bought used while in high school. 85 years later, it still works fine. No computer or printer bought today will be fully functional in 2094.
#20
aka Phil Jungels
When we lived out on the farm, my father in law had a few dozen sheep.
It was a simple matter of fencing the house yard with some woven wire, and hanging a gate across the driveway.
Then, every week or ten days, herd 'em in there while we were gone to work.
Yard would be all freshly shorn, and fertilized, in a day. It's amazing how much grass two dozen sheep can eat in a day. It was "cut" really short, tooooooo!
Shoo 'em back out when we came home, and we were good to go......
It was a simple matter of fencing the house yard with some woven wire, and hanging a gate across the driveway.
Then, every week or ten days, herd 'em in there while we were gone to work.
Yard would be all freshly shorn, and fertilized, in a day. It's amazing how much grass two dozen sheep can eat in a day. It was "cut" really short, tooooooo!
Shoo 'em back out when we came home, and we were good to go......
#22
♋ ☮♂ ☭ ☯
Join Date: Feb 2005
Location: 40205 'ViLLeBiLLie
Posts: 7,902
Bikes: Sngl Spd's, 70's- 80's vintage, D-tube Folder
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
I dont care about lawns. We were looking for an investment property
here in FL as we always do wherever we are, and the first Realtor we
worked with COULD NOT grasp our preferring natural terrain - sand, brown
scrub grass and all, over 'nice' sod/hi-maintain fake kondo lawnage.
I think 'mature' landscaping looks way better than sho-place.
A few pink flamigo's, colored wish globes, bathtub Mary ........
here in FL as we always do wherever we are, and the first Realtor we
worked with COULD NOT grasp our preferring natural terrain - sand, brown
scrub grass and all, over 'nice' sod/hi-maintain fake kondo lawnage.
I think 'mature' landscaping looks way better than sho-place.
A few pink flamigo's, colored wish globes, bathtub Mary ........
__________________
☞-ADVOCACY-☜ Radical VC = Car people on bikes. Just say "NO"
☞-ADVOCACY-☜ Radical VC = Car people on bikes. Just say "NO"
#23
Senior Member
Join Date: Jun 2008
Location: eastern Massachusetts
Posts: 994
Bikes: Rans V-Rex
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I keep telling my wife the ideal size of lawn is that which can be easily cut with a reel mower in a half hour. Everything outside of that can become meadow. I have yet to win this argument.
#24
Senior Member
Join Date: May 2006
Location: Conifer CO
Posts: 412
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Nice link about sharpening and adjusting these types of mowers.
My dad still uses the one he got from his dad.
https://www.reelmowers.info/
My dad still uses the one he got from his dad.
https://www.reelmowers.info/
#25
Senior Member
Join Date: Jun 2007
Location: SW Ohio
Posts: 3,509
Bikes: 3 good used ones
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 83 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
I have a good sized lawn, about an acre, and have been using the push-style mower for a couple years. I would use a gas rotary once or twice early in the season and then push mow the rest of the year.
I have mixed feelings. The cut is poor and I often had to roll over an area several times, kind of go back-and-forth. What's worse is that last year I messed up my back (sacroiliac joint) with the darned thing. It's a long story, but I mowed with one hand for a few weeks and then ended up with a bad back for 6 months. Now, I am not sure I want to use it at all anymore.
What's cool is that I now have a contractor cutting it at $35 a pop. Since it used to take me 3 or more hours to mow, I doubt that I will ever return to doing it myself again. I rather ride....and not risk messing up my back.
I have mixed feelings. The cut is poor and I often had to roll over an area several times, kind of go back-and-forth. What's worse is that last year I messed up my back (sacroiliac joint) with the darned thing. It's a long story, but I mowed with one hand for a few weeks and then ended up with a bad back for 6 months. Now, I am not sure I want to use it at all anymore.
What's cool is that I now have a contractor cutting it at $35 a pop. Since it used to take me 3 or more hours to mow, I doubt that I will ever return to doing it myself again. I rather ride....and not risk messing up my back.