- can i use a 27" tube in my hybrid tire
- Fit a 135 hub into 126 rear spacing Without Cold Setting?
- Chris King bottom bracket injector use
- Upgrading Hub + Headset Bearings
- Ultegra ST-6703 Dual Controls (Problem?)
- Effective handlebar reach, Soma Sparrow
- 8 speed Shimano 600 with new crank
- SRAM mountain double compatible with Rival BB, FD and brifters?
- how to evaluate the severity of this "crack" inside rim
- When to replace a rear derailleur hanger?
- CF frame #4 just got to US customs
- Thank All Of You
- anybody heard of deore lx 660 series?
- grip shift indicator stuck
- Deore 11-36T 10-speed cassette on a road bike with Ultegra 6600 Derailleur?
- Chainset & crank swap question from a newbie
- brake lever and cable fitting
- Brake Bridge Question
- Should I rebuild a beater?
- Headset reassembly (HELP)
- brakes
- Shimano bb compatibility table?
- What diameter hole do I need in the rim for a Schrader valve?
- bike part.....what.s it called
- Strange dull clicking sound
- Is these type bars compatiable with this type stem?
- Stripped threads on lever clamp
- Front derailleur and stiff thumb shifter
- building a set of rollers
- Rear Brake Schwinn
- Moving from 7 speed cassette upwards gear-wise
- Chin haur or Shimano bottom bracket?
- Shifter/Derailleur Copmpatability
- Wrenching vid.
- Shimano 105 Handlebar Shifter Compatibility with Handlebars
- DA 9 spd does not shift well in the middle cogs?
- Best way to remove grips without compressed air or cutting them?
- Replacing bearings on WI hub
- Tuning a Ultegra FD for a bike with SRAM Red
- Installing VO Chainguard
- Shimano 600 STI Levers
- braze-on front derailleur adapter compatibility
- Is this something to worry about?
- Brakes don't work anymore..
- Back to Basics! Any Good Tips For Getting Your Handlebars Straight?
- Change from stem shift to downtube?
- shimano rapidfire
- Loose Crankshaft Bolt
- Anti-Seize Compound
- Wheels, again
- Chain wear question?
- Felt QX85 - Want to change my forks.
- Putting together a rear road wheel hub. Please help
- Grips slipping
- Pinhole Leak in Tube
- Quick Release Tire + No Ridges = Bad Idea??
- Bent Fender
- Grip Shifter, Shifting and Hand/Wrist Movement
- Bearing cone. What size and where to buy?
- 155 mm crank on comfort bike?
- Bike Decals Reproduction/DIY
- Removable style Presta Cores
- New Bike Delivered. Want to swop brakes over to opposite sides
- 3-speed hub shifting options
- Back Rack Suggestions
- Front cranks (35/49) won't allow chain to jump to larger ring unless going DOWNHILL!?
- 700c vs 27"
- Does this spindle look JIS or ISO?
- Do not attempt to lift it
- rim size question
- Is a DuraAce 7800 front derailleur compatible with DuraAce Di2 7900?
- Fitting bar end shifters into bars...problem...
- removing the adjustable race with no flats
- New 10 speed wheel/hub and 8 speed cluster help
- Axle to crown length question
- Chain Keeper
- Cervelo S2 Cable routing/possible damage to frame
- bent steel frame, any chance of it bending back?
- Front derailleur question
- Defect in my $4000 carbon frame. Is this considered acceptable?
- Dura Ace Granny Gear Dynamics?
- Help! problem with cotter pin (i think)
- Gahhhhhh! 1x8 Chainline Issues
- 9-speed Deore crankset, what is the best road-bike drivetrain option?
- Can you mix & match derailleurs and shifters?
- properties of spoke nipple materials
- Help with fixing/replacing my crank!?
- Ticking noise in front wheel
- Convert bottom pull FD to top pull?
- Do bike sprocket size differences matter?
- Torque for cranks?
- shimano road shifters
- Replacing my rear cassette
- Hanging Bikes for Storage?
- IS getting a 2nd set of wheels easy? Or should I just be looking at a 2nd bike?
- 27" vs 700c
- Tubular Tire missing the base tape, what to do?
- now to put the thing back together
- Am I likely to have chainline issues with this combination?
- Help me spoke length