- How to remove an "endless clamp" front derailleur?
- add oil to inside pump cylinder to increase life span, fix seal?
- Galled Brake Pivot Screw
- Shimano BB question
- Derailleur Hangers & other
- Converting to a fixie
- odd ball parts
- chain rides up on cogset
- freewheeling - pedals wouln't engage
- spoke lean
- Change frame - Giant Boulder
- replace old BB with cartridge
- interesting tip for stuck cranks
- New Campy Veloce Shifters a little sticky, dropping more than 1 gear at a time...
- The Official Floor Pump Thread
- Mountain bar types that can mount in pinch-bolt quill stems
- Here's a brain teaser for you
- 9 speed derailleur with 7 speed cassette?
- Ultegra Brifter with 1/2" of play
- What hex-key for front gear cable bolt?
- skipping holes on hubs
- Will a 105 cranketset work with Tiagra
- Barrel-adjuster -- which way to turn it?
- Casette Removal Help :(
- question for the wheelaholic crowd
- noisy rear cog?
- Can anyone come up with an idea of what might be causing this noise?
- why is this happening?
- Noisy bottom bracket
- Help, my bike tried to kill me!
- First Wheelbuild/Spoke Question
- 1/8 chain and ring for more durability?
- SRAM chain+shimano crankset/front derailleur?
- Are my cables too short?
- aerospoke axle swap
- Campag Champ triple chainset
- Converting English Cup and Cone axle to square taper bb?
- Can a common joe adjust brifters?
- "Jerking" derailleur/chain
- wobbling front hub
- Suntour X-Press Accushift Plus -How does it work?
- rear derailer adjustment?
- Adjusting front derailer
- Tri Bike - Ultegra FD Adjustment
- Brand new Cannondale bike brakes - Why are they deterioriating?
- scales
- 'Tuning out' granny gear
- Extra click with STI shifter?
- What kind of derailleur is this?
- What tools will I need?
- tubeless on clincher
- Bottom Bracket and Crank replacement help
- Taking off the plastic chainguard Trek 7.3
- Clunk in drivetrain...loose freewheel?
- spackle for tires?
- Status report 4: Old Cannondale upgrade; carbon fiber fork
- Lowering the gearing on a road bike
- using 10 speed ultegra brifters w/ a 9 speed drivetrain
- Creaky Crossmax Spokes
- English/Italian Hub Threading Question
- Good tube deflates
- Shopping for used external BB style cranks
- semi-horizontal dropouts: adjusters
- Nashbar Dry Lube = repackaged ProLink?
- Replacement derailleur wheels
- When is a carbon frame nooched?
- 12-25 to 12-27
- Chain recommedation
- Using 8-speed bar-end shifters on 7-speed cassette
- slipping mt bike grips
- Peugeot headset problem - still loosening
- Looking to buy tools and workstand
- Brake pads too thick/Wheel cannot move?
- 10 Speed Cranks - Shims To Use On 8 Spd Setup
- Advice on maintaining Avid BB7 Disc Brakes?
- Lithium Grease on bike parts?
- Old Frame. New Brakes. Need Help
- Are mail-order wheels ready to ride?
- Tire question
- Does Gripshirt fit under Rapidfire?
- 1x9 setup on my 'cross bike
- Will this crank fit my bike
- Surly CrossCheck rear brake routing
- Hammered in seatpost or not?
- clean cassette w/Q-tip, pipe clnr, cardboard?
- Dented Frame Evaluation
- New Tire bulging off rim. Never experienced this.
- "Dork disk?"
- 11-32 Mountain Cassette with 53-39 front?
- I need an engineer to help me...
- right bar end
- "Folds" on top and down tubes: Still rideable?
- Bike Shop Employment in Kansas (Lawrence) area?
- Swapping frames (BB issue).
- Ultegra 9spd triple to 10spd compact double
- 152mm Triple Crankset - source needed
- build list
- Seat post size
- chain stretch question...
- DA Brake Pads with Aluminum Splinters