View Full Version : Framebuilders
- Future of 650c?
- Dropout recomendations
- cycle truck hubs??
- Bottom Bracket Drop question
- Photo album on TIG welded mountain bike
- I dont know what to do!
- Cracked frame
- AVID BB7 tech data
- Custom frames and Test Rides
- Cross-threaded BB on Pegoretti frame, stear clear?
- Gasflux C-04 Nickel Bronze with Mapp gas
- Lab discovers titanium-gold alloy that is four times harder than most steels
- Thin wall practice
- Braze or tig weld stainless racks?
- Seat Tube Purpose
- Rohloff vertical dropouts, OEM(1), rim brakes, and QR
- Worksman Front Loader Handling
- Helicopter tape?
- Reverse Steer Road Bike
- New Frame from The Netherlands
- Seat and head angles with lugs.
- Framebuilder made a mistake. What should I do?
- Carbon fiber frame construction
- Braking forces on head tube
- What sized tubing for Head tube
- Full carbon fork on alloy bike
- Finishing a fillet brazed frame... maybe copper plate?
- Lug Building
- cargo bike build - i have shimmy / weave / death wobble - what is the cause?
- touring frame materials
- Fillet Brazing with LFB vs 45% Silver
- Cherubim - Problems dealing With Them?
- Tig weld vs Braze
- alignment
- What about geometry would make a steel bike stiff
- Two Oregon framemakers collaborate, this happens
- Noisy Dirt Stuck in Frame/Fork
- What is it?: Braze-on edition
- Original Keith Bontrager frame jig for sale 3000 obo
- frame repair vs frame building
- Seeking Fork Recommendation
- Re-Sizing a Chromoly Frame..
- I'm making a seatmast Franken-cap, and need some building advice...
- Any framebuilders have insight into this issue I have with a new VO frame?
- Today's Aluminum vs Vintage Aluminum?
- Fork rake, head angle and axle-to-crown measurements (Trail)
- Need help understanding my frame
- I thought this was entertaining (3D renderings of peoples' bad bike drawings)
- Calfee bamboo DIY preorder
- Track Frame Build
- Carbide tipped hole saw
- Corrosion Resistance of 953 Around Welds?
- Bespoke vs Mass Market
- clear coat repair
- Should I get a Solidox torch?
- The jig is up
- Considering getting a frame powdercoated - What do I need to know?
- Tips on paint chip repair?
- CAD software for unusual bikes [Linux edition]
- Comments on Two Step-through Frames
- Frame building course
- Microstructure of carbon fiber
- Adding disc brake mounts to older frame.
- Top tube and seat tube diameters for tandem cycle
- interested in a 953 reynolds frame
- Welder not experienced with bikes
- Bare Aluminum
- Apartment Dweller Propane torch set up help.
- Cost for adding braze-ons to steel frame?
- BB strength
- Material for Chainrings? making own
- gas flux vs paste flux
- Head tubes, 4130, mig, mild steel?
- Have an older Viner track frame. Trying to figure out of if SL or Cromor
- True Temper S3 vs Columbus (SL?)
- Repair of steel touring forks
- Effect of a shorter top tube?
- LHT tubes
- Adding braze-ons to a steel frame
- Head tube and frame stiffness
- Please Talk Me Out of This Project
- Twisting a CroMo Stem?
- How to spot a Aluminum frame failure before it happens.
- D-section fork blades?
- U brake post spacing
- Kaisei 8630 vs. 4130
- How to make deep profile rims on the front stable with cross winds and gusts?
- Repair Options?
- DIY brazing of housing guides to top tube. MAPP.
- 27.0, 27.2, Reynolds or Columbus in the 70's
- Calfee DIY bamboo
- Joining tubes for trailer
- frame life.
- Advice before I place my order
- So what file(s) would you suggest for a (steel) steerer tube?
- How to make a bike logo
- Rip
- Bamboo Mk4
- rust - will sandblasting/powdercoat fix this?
- frame materials