Cranbrook ride.
 

As a 69 year old prostate cancer survivor with one gimpy knee, I got back into bike riding again last summer, after my cancer treatments ended. I took my 7-8 year old single speed road bike on a ride, and found much to my surprise that I could still ride. I am looking at bikes online with some gears to make hills easier which would also extend my range. I ride at least 5 miles every day, and had been riding to my weekly chess group, a 10 mile round trip. At one point, I have to dismount and do a short push of shame of maybe 25-30 yards on the way to the group. The ride home is like thrill ride as there is lots of downhill riding.
I have my adult kids Huffy Cranbrook at my house for a while, and have been riding it often. It is slower than my single speed road bike, but still fun to ride. Here day I decided to see if I could ride that Cranbrook to our meeting place to see if it was fesable for me to ride that tank. It wasn't chess day, so this was just a fun ride o see if I could live with a single speed cruiser. I was actually quite pleased that this old geezer could make it, and without any more pushing than when I ride the road bike. I wasn't really any more or less tired after the trip yo the site. That 5 mile stretch, due to lots of gradual uphill riding takes about 40 minutes, with a auick stop for some water. I have removed both fenders and the chain guard from the Cranbrook, so it's a little lighter than stock. They trip home, of course, is my fun payback for the up hills on the trip to the site. So, now, I am thinking of buying a cruiser bike, with or without multiple gears, as a second bike. But, I am very happy to know I can do this ride on an old Cranbrook, and am working up to longer rides up to 30-40 miles. I know I could do it on a cruiser, as once I get out of my housing developement, the longer rides are pretty flat. My knee problem isn't that big of a deal for me, and I walk with a cane. The cane is mostly because, if I trip or stumble, I'd likely fall, as the right knee isn't much help. I am happy to be able to ride at all after what I've been through, and am ecstatic to be able to do the longer rides too. I'll keep the rode bike, and have to do some bottom bracket maintenance, which will be new to me. I want to get a second bike before I get into fixing the rode bike, so I have a ride.

Good for you! We’re the same age. While I am still doing OK on my road bike, I do have my eye on an E-bike. I expect it will be in my not to distant future. Keep riding and keep your car at home.

I have very much considered an ebike also. However, right now, I am still experimenting with my limits using own geezer body powering regular bikes. I may still buy an ebike eventually, but am somewhat put off by the difficulty of pedalling with the electrics shut off. The excess drag of the motor combined with the comparatively enormous weights of these e bikes concern me. Also, it's dam hard to find a way someone would ship lithium batteries to me in Hawaii. An ebike without a battery becomes pretty much a boat anchor.

that fork looks weird.

What's weird about it?

It's straight, like it rammed something. No Cranbrook has that straight a fork- in fact all Walmart cruisers use the same fork.

Speed is just a number. I ride not because I have to get anywhere but because I like to ride. I'm a big fan of the Electra Cruiser 7D. It has a few gears 1-2 being pretty low to make any hill rideable and a few more for the flats to go the distance if I want.

I find the Walmart cruisers to be a little on the small side for me (but fit is different) and they do have a couple of multispeed cruisers that would fit your bill. IF you have a local shop you should be able to find a nice one but that depends on your needs. Good luck and good riding.

Pulling up pics of the Huffy Cranbrook show they do have what looks like an almost straight fork.

This is my Cranbrook . Fork on this older one was curved. Roger

https://cimg5.ibsrv.net/gimg/bikefor...581795fc00.jpg

you are a gem indeed

Anyone with a standard Huffy Cranbrook have a model number? Mine, the red one in the photo in this thread, is 5-6 years old. Sent Huffy an email to get a price on a new rear wheel. Sent them the complete serial number that is stamped on the underside of the bike, but they say they want the model number. The sticker under the bike with that info is long since unreadable.

You can get a whole women's single speed cruiser on craigslist with virtually no miles for less than a replacement wheel. All single speed cruisers use same axle and hub size.

Tell them it's a model 56462 Give them that. it's a 2004 Cranbrook with the correct wheel you need. They might send you a free bike.....

A rode bike is a happy bike.