![]() |
Shifter cable
1 Attachment(s)
Below is a photo of my Shimano rear derailler cable after approx. 5,000 miles use. I haven't been in cycling long enough to know, but my mechanic was appalled! My shifters are Shimano 6800 series (on a Spec. Roubaix). The mech. even contacted Shimano to ask about getting me a new shifter; he feels that there is a design flaw of some sort that results in the shifter "chewing up" cables like that. No-go on replacement from Shimano, but I am very glad to know what to check on when my usually flawless shifting goes haywire. Anyone have similar experience?
http://bikeforums.net/attachment.php...hmentid=487533 |
Replace it before it fails, Next time .. It's Preventative Maintenance ..
the old cable out the side brifters had less cable bends .. my bar end shifters seem to take the flexing ok for many years.. |
my 10 speed 105 5700 right hand shifter chomped up the cable in the shifter @ about the 10000km mark. Its the first time I have every seen that, maybe thats their life span? I normally change the cable inner and outer around that mark anyway as I ride all weather year round.
|
Originally Posted by casjr2171
(Post 18312074)
Below is a photo of my Shimano rear derailler cable after approx. 5,000 miles use. I haven't been in cycling long enough to know, but my mechanic was appalled!
|
You are fortunate that you caught it before it broke completely; getting the broken-off head out is a painful process. Best to check the cable frequently and replace it as soon as any fraying at all is apparent.
|
I've gone to replacing the rears every year (3K miles). I start noticing it on the low to high shifts where the RD spring is doing the work.
|
[QUOTE=casjr2171;18312074but my mechanic was appalled! My shifters are Shimano 6800 series [/QUOTE]
How much work on bike does you mechanic do? As others have noted, this is expected with Shimano STI's 5000 miles is more than enough to have swapped the cable at least once. Surprised your mechanic wasn't aware/hadn't seen this before. |
Originally Posted by casjr2171
(Post 18312074)
Below is a photo of my Shimano rear derailler cable after approx. 5,000 miles use. I haven't been in cycling long enough to know, but my mechanic was appalled! My shifters are Shimano 6800 series (on a Spec. Roubaix). The mech. even contacted Shimano to ask about getting me a new shifter; he feels that there is a design flaw of some sort that results in the shifter "chewing up" cables like that. No-go on replacement from Shimano, but I am very glad to know what to check on when my usually flawless shifting goes haywire. Anyone have similar experience?
http://bikeforums.net/attachment.php...hmentid=487533 |
Yup, shifter/brake cables are "consumables" just as tires/tubes, chains/cassettes and brake pads are.
|
Yes, I'm finding that out . . . 5K miles not bad for cable life. I couldn't figure out why shifting was "off." Never failed completely, but looks like it had maybe 2 shifts left in it!
|
| All times are GMT -6. The time now is 08:13 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.