Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

replace front derailleur

Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

replace front derailleur

Old 03-25-17, 11:56 AM
  #1  
Junior Member
Thread Starter
 
Join Date: Jun 2016
Posts: 6
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
replace front derailleur

I want to replace my front derailleur, and question is my chain is fairly new less than 500 miles, ( shimano ultegra chain ), can I unlink the chain, replace front derailleur and connect the chain again? do I need to get new chain link or something? thanks
benjaminlin is offline  
Old 03-25-17, 12:02 PM
  #2  
Senior Member
 
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,546

Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter

Mentioned: 139 Post(s)
Tagged: 1 Thread(s)
Quoted: 5703 Post(s)
Liked 2,434 Times in 1,346 Posts
Originally Posted by benjaminlin
I want to replace my front derailleur, and question is my chain is fairly new less than 500 miles, ( shimano ultegra chain ), can I unlink the chain, replace front derailleur and connect the chain again? do I need to get new chain link or something? thanks
Modern chains made for more than 8 speeds, including Ultegra, cannot be cut and spliced by pushing a pin out and back in.

This isn't to say it cannot be done, and many do successfully. However, these narrow chains have the plates sitting at the end of the pin, and depend on the pin being peeled over to keep the plate from migrating out and off the end. When you push a plate out, you break off those peeled edges, and lose the resistance to migration.

So, it's a made for the job splicing pin, or a connecting link.
__________________
FB
Chain-L site

An ounce of diagnosis is worth a pound of cure.

Just because I'm tired of arguing, doesn't mean you're right.

“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN

WARNING, I'm from New York. Thin skinned people should maintain safe distance.

Last edited by FBinNY; 03-25-17 at 12:06 PM.
FBinNY is offline  
Old 03-25-17, 01:00 PM
  #3  
Senior Member
 
Retro Grouch's Avatar
 
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225

Bikes: Catrike 559 I own some others but they don't get ridden very much.

Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1572 Post(s)
Liked 642 Times in 363 Posts
Many front derailleurs (but not all) have a screw that can be removed so that you can pry it apart to remove the chain. That's what I do when I can.
__________________
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
Retro Grouch is offline  
Old 03-25-17, 01:01 PM
  #4  
Senior Member
 
Vintage_Cyclist's Avatar
 
Join Date: Nov 2013
Location: Big Apple
Posts: 1,632

Bikes: yes

Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 510 Post(s)
Likes: 0
Liked 401 Times in 172 Posts
Install a quick link on the chain, if you're opening it up. Conversely, front derailleurs commonly have a screw at the end of the cage, that you can remove; this would allow you to slide the chain in, without cutting the chain.
Vintage_Cyclist is offline  
Old 03-25-17, 02:34 PM
  #5  
Senior Member
 
ramzilla's Avatar
 
Join Date: Dec 2014
Location: Fernandina Beach FL
Posts: 3,605

Bikes: Vintage Japanese Bicycles, Tange, Ishiwata, Kuwahara

Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 700 Post(s)
Liked 321 Times in 251 Posts
This is exactly why I quit buying Shimano chains & started buying KMC quick link chains. Get a Park Tool quick link tool. No more worries.
ramzilla is offline  
Old 03-25-17, 03:08 PM
  #6  
Senior Member
 
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,546

Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter

Mentioned: 139 Post(s)
Tagged: 1 Thread(s)
Quoted: 5703 Post(s)
Liked 2,434 Times in 1,346 Posts
Originally Posted by ramzilla
This is exactly why I quit buying Shimano chains & started buying KMC quick link chains. Get a Park Tool quick link tool. No more worries.
I don't see the difference. Shimano chains can also be closed with KMC quick links. Of course, there is a difference if links can be reused, but more and more this isn't the case, and the "use only once" rule for links may become universal with the narrower inks.

Depending on the FD, and the OP's mechanical skill, he might grind out the FD cage closure, and replace it with either a pop rivet or screw and nut.

IMO - one of the worst things that ever happened to FDs was the move to closing the cage with a rivet rather than screw and nut.
__________________
FB
Chain-L site

An ounce of diagnosis is worth a pound of cure.

Just because I'm tired of arguing, doesn't mean you're right.

“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN

WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FBinNY is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
_ForceD_
Bicycle Mechanics
3
11-07-17 02:09 PM
cave12man
Road Cycling
25
08-15-16 09:14 AM
mortenfyhn
Bicycle Mechanics
4
07-26-11 03:30 PM
CNY James
Bicycle Mechanics
6
01-17-10 12:30 AM
hjbiker43
Bicycle Mechanics
1
12-15-09 04:54 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.