Replacement races for ti axle
#1
Senior Member
Thread Starter
Join Date: Feb 2020
Posts: 2,817
Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 1106 Post(s)
Likes: 0
Liked 1,326 Times
in
782 Posts
Replacement races for ti axle
I have a Zeus TI BB axle that has pressed-on steel races which have pits.
It's a long shot, but are replacement races available?
It's a long shot, but are replacement races available?
#2
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,071
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4199 Post(s)
Liked 3,851 Times
in
2,301 Posts
I highly doubt you'll find the races independent of the spindle. even finding a replacement spindle might prove hard.
Perhaps moving this to the C&V forum would get better response. Andy
Perhaps moving this to the C&V forum would get better response. Andy
__________________
AndrewRStewart
AndrewRStewart
#3
Senior Member
Join Date: Jan 2010
Location: se MIch.
Posts: 2,306
Bikes: 1938 claud butler,1983 Basso,teledyne titan,teocali super,nrs,1993 stumpjumper fsr,Paramountain,Paramount Buell(sold),4 banger,Zaskar LE,Colnago Master Ibex MTB,1987ish,.etc....
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 802 Post(s)
Liked 2,976 Times
in
1,496 Posts
#5
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,071
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4199 Post(s)
Liked 3,851 Times
in
2,301 Posts
For the effort being contemplated I might suggest a Phil BB. At one time Ti axles versions were available, it would be quite the KOF with Phil having been around when this bike was new, have been offered in varying spindle lengths/tapers and with any of the popular BB shell thread standards.
Converting the Zeus spindle to a cartridge bearing might be possible. This has been a topic with the classic-rendezvous-lightweight-vinta...oglegroups.com group a few times over the years. What I forget is whether those guys who know this stuff better then I do came to the conclusion that a bearing is available with the ID that works for the spindle and an OD that a different set of BB cups have. Good luck. Andy
Converting the Zeus spindle to a cartridge bearing might be possible. This has been a topic with the classic-rendezvous-lightweight-vinta...oglegroups.com group a few times over the years. What I forget is whether those guys who know this stuff better then I do came to the conclusion that a bearing is available with the ID that works for the spindle and an OD that a different set of BB cups have. Good luck. Andy
__________________
AndrewRStewart
AndrewRStewart
#6
Senior Member
Thread Starter
Join Date: Feb 2020
Posts: 2,817
Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 1106 Post(s)
Likes: 0
Liked 1,326 Times
in
782 Posts
Oneclick,
I may be able to help you a bit. Does this BB take 3/16" bearings? Depending on how much damage has been done I may be able to clean the races and get the parts up to good working order. I will need all of the bottom bracket parts here in the shop, so you will have to ship them to me. If you are interested PM me or give me a call: 812-336-3283. Smiles, MH
I may be able to help you a bit. Does this BB take 3/16" bearings? Depending on how much damage has been done I may be able to clean the races and get the parts up to good working order. I will need all of the bottom bracket parts here in the shop, so you will have to ship them to me. If you are interested PM me or give me a call: 812-336-3283. Smiles, MH