![]() |
Originally Posted by cyccommute
(Post 20099437)
All those attributes apply to mineral spirits as well. On the plus side, it evaporates much faster and more cleanly than kerosene. Kerosene isn't that volatile.
Originally Posted by cyccommute
(Post 20099437)
I would caution against WD-40. It's not the solution that's the problem, it's the added mineral oil that you don't really need. WD-40 is just mineral spirits with about 25% mineral oil added to it. Using straight mineral spirits just cuts out the unnecessary bits.
Can we still be friends? :D Steve |
One thing I learned with the paraffin mix is pour a little into a small can and use that to brush on chain. Keeps the main supply nice and clean.
https://www.bikeforums.net/moz-exten...r-marker-1.png |
for Andrei Description
RACING SPRAY WHITE is a white, solvent-containing, grease-based and adhesive semi-synthetic chain lubricant for the lubrication of bike chains (roller chains). After the evaporation of the solvent a stringy and adhesive grease remains which is not centrifuged or washed off. The white solid lubricants result in an excellent wear protection. |
Originally Posted by sweeks
(Post 20099480)
This is probably "6 of one, half dozen of another" territory. Both solvents work. The lower volatility of kerosene isn't a huge drawback, as kerosene has some lubricating qualities. Higher volatility may predispose to a greater fire hazard under some circumstances. I can see your point though.
As I said, I prefer kerosene, but I have a gallon (literally, in a can) of WD-40. It works as an acceptable alternative. WD40 suffers from the same problem only worse.
Originally Posted by sweeks
(Post 20099480)
Can we still be friends? :D
Steve |
Originally Posted by cyccommute
(Post 20101467)
The flash point of both solvents is similar. I suggest mineral spirits over kerosene (or diesel) simply because evaporates more cleanly.
Steve |
Mineral spirits
Does anyone know a good place to buy mineral spirits in the UK? [MENTION=1295]cyc[/MENTION]cocommute recommended it, and the closest possibility for me was an art supply shop; they did have a non-noxious fluid for paint cleaning, but the large bottle cost about £50. Is this more of a house painting product?
|
Originally Posted by mfcity
(Post 20112430)
Does anyone know a good place to buy mineral spirits in the UK? [MENTION=1295]cyc[/MENTION]cocommute recommended it, and the closest possibility for me was an art supply shop; they did have a non-noxious fluid for paint cleaning, but the large bottle cost about £50. Is this more of a house painting product?
|
Originally Posted by mfcity
(Post 20112430)
Is this more of a house painting product?
|
Originally Posted by davidad
(Post 20083936)
https://thelashop.com/products/jewel...nt=45219195210
Clean ever 800 mile and relube with a mix of mineral spirits and chainsaw bar oil. I also keep a one-gallon steel paint can full of mineral spirits. You can get one of these generic cans at any good paint or hardware store. If I fill it 1/3rd full, I can slosh around a few greasy parts and clean them up real good. Sometimes I can throw a seriously-pooey chain in there before tossing it in the ultrasonic. |
Originally Posted by cyccommute
(Post 20101467)
I suggest mineral spirits over kerosene (or diesel) simply because evaporates more cleanly.
|
Thanks!
2 Attachment(s)
Well, just a late thank you to [MENTION=21724]cyccommute[/MENTION] and everyone else for the tips. I was happy to find a white spirit equivalent called Clean Spirit at the local paint shop (for only £3 for a big bottle), soaked the chain in it for a couple of days and find it came out really clean.
The weather is also suddenly so sunny here that I am about to finally lube the chain with Squirt and take my fair-weather road bike out on the road again. |
| All times are GMT -6. The time now is 10:12 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.