Why a spring in the Noodle?
#1
Senior Member
Thread Starter
Join Date: Sep 2014
Posts: 3,893
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1062 Post(s)
Liked 665 Times
in
421 Posts
Why a spring in the Noodle?
Servicing a bike in the family fleet, I noticed a spring inside the v-brake Noodle. What's that for? All I can think is to make the brake less responsive, and I'm tempted to remove it. Ideas?
#3
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,084
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4205 Post(s)
Liked 3,865 Times
in
2,312 Posts
Since linier brakes are so powerful and many riders who buy low end mountain and hybrid bikes have never had so strong a front brake and since the bike company lawyers have a pretty big say in how things are done the spring lessens the on set of max braking forces. Think of it like a an anti lock device, which of course it isn't at all. Note that the more expensive bikes with these brakes generally don't have the spring loaded noodle.
I've made jokes about having brakes so powerful that you need to make them weaker. Andy
__________________
AndrewRStewart
AndrewRStewart
#4
Junior Member
Join Date: Dec 2013
Posts: 19
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
What??? Where'd you hear that one?
Since linier brakes are so powerful and many riders who buy low end mountain and hybrid bikes have never had so strong a front brake and since the bike company lawyers have a pretty big say in how things are done the spring lessens the on set of max braking forces. Think of it like a an anti lock device, which of course it isn't at all. Note that the more expensive bikes with these brakes generally don't have the spring loaded noodle.
I've made jokes about having brakes so powerful that you need to make them weaker. Andy
Since linier brakes are so powerful and many riders who buy low end mountain and hybrid bikes have never had so strong a front brake and since the bike company lawyers have a pretty big say in how things are done the spring lessens the on set of max braking forces. Think of it like a an anti lock device, which of course it isn't at all. Note that the more expensive bikes with these brakes generally don't have the spring loaded noodle.
I've made jokes about having brakes so powerful that you need to make them weaker. Andy
A. Cable Housing.
B. Housing End Ferrule.
C. Cable Guide.
D. Housing Detent.
E. Rubber Noodle.
F. Cable Clamp.
G. Cable Tail.
H. Cable Cap.
I. Brake Arm
J. Brake Block (Pad).
K. Block Setting Screw.
L. Arm Mounting Bolt.
#5
Junior Member
Join Date: Dec 2013
Posts: 19
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I cant find anything indicating a spring being used to "decrease" the strength of a linear pull brake. Given the lever advantage at the handle, I cant picture a little spring hidden in a rubber boot providing any "anti-lock" affect on a rim. A lawyer friend of mine DID say it would be more likely a bike company be sued for an instance of "I applied my brakes, they didn't stop me, and I hit a bus", rather than "I grabbed my brakes too hard and got launched over the handlebars". The latter is user error vs. the former being inadequate safety device effectiveness.
#6
Disco Infiltrator
Join Date: May 2013
Location: Folsom CA
Posts: 13,446
Bikes: Stormchaser, Paramount, Tilt, Samba tandem
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 3126 Post(s)
Liked 2,105 Times
in
1,369 Posts
The modulator goes between B and C in the above pic. It doesn’t decrease the strength because it’s in line with the cable. But it will increase the pull distance and make it feel more spongy. Like air in a hydraulic line.
Last edited by Darth Lefty; 11-09-18 at 11:05 PM.
#7
Insane Bicycle Mechanic
Join Date: Mar 2008
Location: other Vancouver
Posts: 9,839
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 806 Post(s)
Liked 708 Times
in
378 Posts
There were some V-brakes that came with "force limiters", which reduced the amount of pressure applied to the pads if the lever was pulled with great force. I agree that this is a liability-limiting device, not a practical design feature.
__________________
Jeff Wills
Comcast nuked my web page. It will return soon..
Jeff Wills
Comcast nuked my web page. It will return soon..
#8
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,084
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4205 Post(s)
Liked 3,865 Times
in
2,312 Posts
My comment about making the brakes weaker is the joke. Of course an inline spring only slows down the point where max force is attained.
As to the OP's question about removing the spring loaded noodle I say please do. You will find the feel is vastly improved. Andy (who knows how to modulate his brakes and doesn't need any stinking springs).
As to the OP's question about removing the spring loaded noodle I say please do. You will find the feel is vastly improved. Andy (who knows how to modulate his brakes and doesn't need any stinking springs).
__________________
AndrewRStewart
AndrewRStewart
#9
Senior Member
TBH it doesn't make a huge difference - it might make the travel between pad contact & wheel lockup a bit wider, maybe. Remove it if you wish but I'd suggest try it first. If I did remove it I'd change a whole new noodle not just remove Spring.
Most interesting occurrence was on Raleigh Chopper Mk3 the early one had Xnine levers and Tektro arms. A few years later same bike comes with Alhonga levers & arms plus springy noodle. Ride them back to back & I'd doubt you'd pick which had the spring if I didn't tell you.
#10
Senior Member
Join Date: Dec 2009
Location: Melbourne, Oz
Posts: 9,547
Bikes: https://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=152015&p=1404231
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 1529 Post(s)
Liked 718 Times
in
510 Posts
The spring is an anti feature like lawyer tabs. Ditch it .
#11
Senior Member
Join Date: Mar 2008
Posts: 8,688
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1074 Post(s)
Liked 295 Times
in
222 Posts
It is a ”brake/force modulator”.å
It ”works” under the assumption that people try to control their braking by the amount of lever movement. So for the amount of wire pull corresponding to the compressibility of the spring, the brake’s pinch force is determined by the characteristics of the spring rather than the amount of lever movement/cable pull.
Done ”right”, it means that pinch force increases a little slower WRT lever travel than If the brake is set up without brake modulator.
It ”works” under the assumption that people try to control their braking by the amount of lever movement. So for the amount of wire pull corresponding to the compressibility of the spring, the brake’s pinch force is determined by the characteristics of the spring rather than the amount of lever movement/cable pull.
Done ”right”, it means that pinch force increases a little slower WRT lever travel than If the brake is set up without brake modulator.
#12
Junior Member
Join Date: Dec 2013
Posts: 19
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
that makes more sense. I was thi king the wire was in the ribs of the rubber "E", and not an actual spring, per se, but white to prevent the ribs from deforming.
#13
Senior Member
Join Date: Nov 2008
Location: South Jersey
Posts: 1,959
Bikes: Too many Bicycles to list
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 90 Post(s)
Liked 137 Times
in
45 Posts
I call that anti lock brakes when I find them lol, I have seen this on mid level & low level bikes lately.
Glenn
Glenn
#14
Senior Member
Thread Starter
Join Date: Sep 2014
Posts: 3,893
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1062 Post(s)
Liked 665 Times
in
421 Posts
Amusingly, the people I know who think that disc brakes make a night-and-day difference, probably all rode cheap hybrids with the spring in the noodle. The bike we're talking about here is a cheap hybrid too. The noodle needs a new one since it has gotten banged up, so I think I know what I'm going to do.
#15
Banned
Why a spring in the Noodle?
Soften , modulate, how hard the front V brake comes on, when you pull the lever.
say in a panic stop..
So you don't stop only the bike, out from under you, and go over the bars..
They are on entry level casual style bikes, in the LBS.
rather than remove the spring , just buy a new noodle , they're so cheap!
say in a panic stop..
So you don't stop only the bike, out from under you, and go over the bars..
They are on entry level casual style bikes, in the LBS.
rather than remove the spring , just buy a new noodle , they're so cheap!
Last edited by fietsbob; 11-10-18 at 10:35 AM.
#16
Banned
Someone asked here how to keep the brakes on their tadpole trike,
from stopping too fast & tipping the chainring down into the street..
those modulators would help..
from stopping too fast & tipping the chainring down into the street..
those modulators would help..
#17
Disco Infiltrator
Join Date: May 2013
Location: Folsom CA
Posts: 13,446
Bikes: Stormchaser, Paramount, Tilt, Samba tandem
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 3126 Post(s)
Liked 2,105 Times
in
1,369 Posts
There’s room in a human actuated system to adjust the feel. And a brake has lots of possible adjustments to the feel. If you have hard shoes you can pull really hard but get no stopping. The calipers can flex, the lever can flex, the studs can flex. I don’t want a modulator but I wouldn’t run down someone who does. I don’t want a brake booster either.
__________________
Genesis 49:16-17
Genesis 49:16-17
#18
Shimano Certified
When I do tune-ups I often remove them if to balance the feel. On new assemblies they seem to feel ok but the spring performance I think flattens a bit with age.
#20
Banned
Yea If a Mountain bike racer, not a JRA old person, you would dislike them..
My 20" wheel BiFri, 160 disc BB7 had virtually no front modulation
(disc being 1/3 of the wheel size, may have some influence.. )
at slow speeds approaching a blind corner
with a building tight up to the sidewalk, Car right in front of me,
It Stopped the bike, but my body did not..
I thought about using one, Instead bought TRP Hy Rd Calipers,
so am finding, they have a smoother modulation..
With adjustable cable pull MA Avid Speed Dial Levers , I have more adjustments
to get the feel right for Me.
[Yea Disc Vs V is apples and Oranges ]
...
My 20" wheel BiFri, 160 disc BB7 had virtually no front modulation
(disc being 1/3 of the wheel size, may have some influence.. )
at slow speeds approaching a blind corner
with a building tight up to the sidewalk, Car right in front of me,
It Stopped the bike, but my body did not..
I thought about using one, Instead bought TRP Hy Rd Calipers,
so am finding, they have a smoother modulation..
With adjustable cable pull MA Avid Speed Dial Levers , I have more adjustments
to get the feel right for Me.
[Yea Disc Vs V is apples and Oranges ]
...
#21
Senior Member
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225
Bikes: Catrike 559 I own some others but they don't get ridden very much.
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1572 Post(s)
Liked 643 Times
in
364 Posts
In the early days of linear pull brakes, there was a group of people who would clamp their front brakes too hard and consequently endo. I remember having to tell customers to be careful until they got the feel for the brake. Some manufacturers installed a spring on the noodles to moderate the brake pressure.
In other words, you're right.
In other words, you're right.
__________________
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
#22
Senior Member
In the very early days of V-brakes (early 1990s?)... didn't they also use the same/old brake levers as calipers? They were shorter travel with stronger pull, so early V-brakes did feel very on/off all or nothing.
#23
Senior Member
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225
Bikes: Catrike 559 I own some others but they don't get ridden very much.
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1572 Post(s)
Liked 643 Times
in
364 Posts
I don't remember that but I have ridden bikes that had canty brakes replaced with linear pull and I find all the cable pull hysteria to be a little over stated.
__________________
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
#24
Banned
A mix has to be found; Low MA brake lever ,
pulls a lot more cable,
High MA Caliper demands more cable pull..
for relatively small motion, of pad to rim..
Increase the MA at the lever, shorter cable pull,
& you have to reduce the MA at the caliper side,
to function with less...
Hence short pull road levers got mini V brakes..
They, easier set up than Traditional Cantilevers..
...
pulls a lot more cable,
High MA Caliper demands more cable pull..
for relatively small motion, of pad to rim..
Increase the MA at the lever, shorter cable pull,
& you have to reduce the MA at the caliper side,
to function with less...
Hence short pull road levers got mini V brakes..
They, easier set up than Traditional Cantilevers..
...
Last edited by fietsbob; 11-11-18 at 10:43 AM.
#25
Insane Bicycle Mechanic
Join Date: Mar 2008
Location: other Vancouver
Posts: 9,839
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 806 Post(s)
Liked 708 Times
in
378 Posts
Within a year or two of their introduction, levers with dual ratios or adjustable ratios became available. I used Avid levers on my Tour Easy recumbent, which had a caliper brake in front and a V-brake in the rear. They worked just fine.
__________________
Jeff Wills
Comcast nuked my web page. It will return soon..
Jeff Wills
Comcast nuked my web page. It will return soon..