Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

My disc brake squeal cure

Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

My disc brake squeal cure

Old 11-20-18, 07:40 AM
  #1  
Lazyass
Senior Member
Thread Starter
 
Join Date: Jul 2008
Location: Minas Ithil
Posts: 9,335
Mentioned: 66 Post(s)
Tagged: 0 Thread(s)
Quoted: 2430 Post(s)
Liked 628 Times in 388 Posts
My disc brake squeal cure

The front RS505's on my road bike started squealing at low speeds, like just before I would come to a stop. So I decided to fix it before they got worse. Did the pads-in-the-oven deal and cleaned the rotors with rubbing alcohol. They were instantly 100x worse, they would blow your eardrums as soon as the pads touched. The bike was unrideable like that. So I sanded the pads and the rotor with my dremel. No change. I cleaned the rotor with brake cleaner. No change.

Now at my wits end, I wiped the rotor with a soapy rag using Dawn dish soap (Walmart brand actually), I didn't even remove the wheel to do it. Then I got another rag with just water to wipe the soap off then dried it. Instantly fixed. For three rides now it's been 100% silent. I don't know if it was just using dish soap or a combination of everything I did but that was my fix.
Lazyass is offline  
Old 11-20-18, 08:49 AM
  #2  
revcp 
Senior Member
 
Join Date: Oct 2012
Location: Twin Cities, Minnesota, USA
Posts: 1,283

Bikes: 2017 Salsa Carbon Mukluk frame built with XT, 2018 Kona Rove NRB build with Sram Apex 1,2008 Salsa El Mariachi, 1986 Centurion Ironman

Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 278 Post(s)
Liked 75 Times in 57 Posts
Dawn dish soap (even Wally World variety) is magic.
__________________
Don't complain about the weather and cower in fear. It's all good weather. Just different.
revcp is offline  
Old 11-20-18, 08:54 AM
  #3  
aclinjury
Senior Member
 
Join Date: May 2013
Posts: 660
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 496 Post(s)
Liked 169 Times in 128 Posts
could you to come back here and update this thread when the noise comes back?
aclinjury is offline  
Old 11-20-18, 09:38 AM
  #4  
kingston 
Jedi Master
 
kingston's Avatar
 
Join Date: Sep 2014
Location: Lake Forest, IL
Posts: 3,718

Bikes: https://stinkston.blogspot.com/p/my-bikes.html

Mentioned: 42 Post(s)
Tagged: 0 Thread(s)
Quoted: 1757 Post(s)
Liked 477 Times in 308 Posts
I have BB7's on one of my bikes and have tried everything to keep them from squeaking. Clean rotors and new pads works for a little while, but the squeaking always comes back. I've given up.
kingston is offline  
Old 11-20-18, 09:53 AM
  #5  
Cyclist0108
Occam's Rotor
 
Join Date: Jul 2013
Posts: 7,248
Mentioned: 61 Post(s)
Tagged: 0 Thread(s)
Quoted: 2366 Post(s)
Liked 2,329 Times in 1,162 Posts
Dawn dish soap will be better at removing oily contaminants than isopropanol.
Cyclist0108 is offline  
Old 11-20-18, 09:54 AM
  #6  
trailangel
Senior Member
 
trailangel's Avatar
 
Join Date: Feb 2014
Location: Pasadena, CA
Posts: 4,794

Bikes: Schwinn Varsity

Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 1891 Post(s)
Liked 669 Times in 391 Posts
Pads in the oven.... What?
Sanding with a power tool.....Huh?
trailangel is offline  
Old 11-20-18, 10:09 AM
  #7  
AnkleWork
Senior Member
 
Join Date: Jan 2013
Location: Llano Estacado
Posts: 3,702

Bikes: old clunker

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 684 Post(s)
Likes: 0
Liked 103 Times in 81 Posts
Bacon grease is said to work miracles.
AnkleWork is offline  
Old 11-20-18, 11:05 AM
  #8  
Bigbus
Very Senior Member
 
Join Date: Mar 2018
Location: Always on the Run
Posts: 1,211

Bikes: Giant Quasar & Fuji Roubaix

Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 413 Post(s)
Liked 342 Times in 243 Posts
Originally Posted by AnkleWork View Post
Bacon grease is said to work miracles.
That really depends on your definition of 'miracles'
Bigbus is offline  
Old 11-20-18, 01:02 PM
  #9  
fietsbob
Banned
 
Join Date: Jun 2010
Location: NW,Oregon Coast
Posts: 43,599

Bikes: 8

Mentioned: 197 Post(s)
Tagged: 0 Thread(s)
Quoted: 7607 Post(s)
Liked 1,339 Times in 847 Posts
My BB7 were quieter with Kool Stop Organic compound pads.
replacing stock Avid..
but the braking it self is better being replaced by TRP Hy Rd.

Front chirps when disc is damp, not when it's dry..

with stock TRP pads..
fietsbob is offline  
Old 11-20-18, 01:22 PM
  #10  
TiHabanero
Senior Member
 
Join Date: Nov 2012
Posts: 3,906
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 1474 Post(s)
Liked 942 Times in 496 Posts
I cured squealing discs by replacing the bike with a bike using cantilevers. Instant relief and fine stopping power to boot.
TiHabanero is offline  
Old 11-20-18, 01:25 PM
  #11  
Rootman
Senior Member
 
Join Date: Sep 2012
Location: NW Arkansas, USA
Posts: 1,031

Bikes: 2015 Giant Roam 2 Hybrid

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 91 Post(s)
Likes: 0
Liked 6 Times in 4 Posts
Originally Posted by AnkleWork View Post
Bacon grease is said to work miracles.
WD40 works great too! After all, it's advertised "If it sticks or Squeaks!".

My dumba** brother in law actually sprayed his car calipers with it to clean them. It only took standing on the brake pedal a few times to clear it off.
Rootman is offline  
Old 11-20-18, 01:41 PM
  #12  
Andrew R Stewart 
Senior Member
 
Andrew R Stewart's Avatar
 
Join Date: Feb 2012
Location: Rochester, NY
Posts: 16,773

Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Srewart 650B ATB

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3644 Post(s)
Liked 2,595 Times in 1,628 Posts
Originally Posted by Rootman View Post
WD40 works great too! After all, it's advertised "If it sticks or Squeaks!".

My dumba** brother in law actually sprayed his car calipers with it to clean them. It only took standing on the brake pedal a few times to clear it off.
Cars are a rather different disk brake situation then bike are. To the above bolded commit- cars generate far more heat (to the point of boiling fluids and turning disks to red hot). Car disk pads are always in contact with the disk (as in they rub all the time. gosh that's so wrong) So heat in the disk is transferred into the pad extremely well and at a level of potential heat that any contaminates in the pads will get boiled off soon enough. Andy
__________________
AndrewRStewart
Andrew R Stewart is offline  
Old 11-20-18, 02:10 PM
  #13  
Lazyass
Senior Member
Thread Starter
 
Join Date: Jul 2008
Location: Minas Ithil
Posts: 9,335
Mentioned: 66 Post(s)
Tagged: 0 Thread(s)
Quoted: 2430 Post(s)
Liked 628 Times in 388 Posts
Originally Posted by trailangel View Post
Pads in the oven.... What?
Sanding with a power tool.....Huh?
Yep. You learn something new everyday.
Lazyass is offline  
Old 11-20-18, 03:15 PM
  #14  
AnkleWork
Senior Member
 
Join Date: Jan 2013
Location: Llano Estacado
Posts: 3,702

Bikes: old clunker

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 684 Post(s)
Likes: 0
Liked 103 Times in 81 Posts
Not sure why people are so resistant to researching and adopting solutions developed in other applications.

Clue: disc roughness, pad "break-in", and pad damping.
AnkleWork is offline  
Old 11-20-18, 03:39 PM
  #15  
Racing Dan
Senior Member
 
Racing Dan's Avatar
 
Join Date: Aug 2015
Posts: 2,103
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 1242 Post(s)
Liked 274 Times in 186 Posts
Im thinking I want to try this. My TRPs have very poor brake performance and they squeal like a pig whenever there is a bit of moisture on the road. Not impressed.
Racing Dan is offline  
Old 11-20-18, 03:48 PM
  #16  
Lazyass
Senior Member
Thread Starter
 
Join Date: Jul 2008
Location: Minas Ithil
Posts: 9,335
Mentioned: 66 Post(s)
Tagged: 0 Thread(s)
Quoted: 2430 Post(s)
Liked 628 Times in 388 Posts
Originally Posted by AnkleWork View Post
Not sure why people are so resistant to researching and adopting solutions developed in other applications.

Clue: disc roughness, pad "break-in", and pad damping.
Huh?
Lazyass is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
John Kelin
Bicycle Mechanics
2
09-05-16 06:52 PM
gearhead82
Bicycle Mechanics
9
06-16-14 07:48 PM
CanadianBiker32
Bicycle Mechanics
9
06-22-13 12:56 PM
Tandem Tom
Tandem Cycling
3
12-29-12 07:59 AM
PMK
Tandem Cycling
5
03-14-10 09:35 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright © 2022 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.