Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

do I have to check disc pads or can I just wait for a scraping sound?

Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

do I have to check disc pads or can I just wait for a scraping sound?

Old 12-28-18, 08:16 PM
  #26  
Buglady
Senior Member
 
Buglady's Avatar
 
Join Date: Apr 2007
Location: Calgary
Posts: 2,338

Bikes: 2018 Ghost Square Trekking B2.8 e-bike; 2015 MEC Cote gravel/touring bike; 2012 MEC Silhouette hybrid; 1985 Boyes-Rosser tourer, now outfitted as Winter Trundle-bike

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 11 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by Spoonrobot View Post
You don't need to remove anything to inspect the pads, a flashlight helps. You look down from the top and visually confirm the remaining pad material - 0.5mm is easy to see and often "very close to the backing plate" is good enough.
Exactly this. Most disc brake pads start off with pad material about the thickness of a US or Canadian nickel when they are new. Once the pad is as thin as a dime, you should replace it.

(This is a very conservative approach, I admit, but it's not because I am trying to sell people brake pads they don't need, I swear! I'm super conservative about replacing things early because I have seen far, far too many brakes where someone put off replacing pads just that tiny bit too long. I am firmly in the "better safe than sorry" camp. Brake pads are $12-20 a pair. New rotor or even new brake caliper after a pad wears through to, or even THROUGH, the backing plate? Much more expensive, and also your old parts will end up in my shop's Box Of Shame and be used to train new mechanics).

Source: I do this for a living (full time mechanic at MEC) and am fully trained in most of the modern brakes. (Except Magura. We make Dave deal with all the Maguras).
Buglady is offline  
Old 04-23-19, 12:26 PM
  #27  
rumrunn6
Senior Member
Thread Starter
 
rumrunn6's Avatar
 
Join Date: Jul 2008
Location: 25 miles northwest of Boston
Posts: 22,495

Bikes: Bottecchia Sprint, GT Timberline 29r

Mentioned: 82 Post(s)
Tagged: 0 Thread(s)
Quoted: 2908 Post(s)
Liked 20 Times in 18 Posts
fwiw ~ wound up checking them mid-February & they looked fine compared to the new ones I bought so I left them in.

took the fronts out


front pad view from side w/o wheel in place


rear pad view from side w/o wheel in place
rumrunn6 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.